• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

2010 GT500 1/4 mile run 10.13

wickedstangs

Chula Vista, CA
Staff member
Administrator
[ame="http://www.youtube.com/watch?v=xrqNfDA7EDE"]YouTube- Broadcast Yourself.[/ame]
 

Mach1Marauder

Well-Known Member
Guys
With relocation brackets, lower arms, adjustable third link and M/T DRs, High 10s is not that hard at all..........with a good driver.:smoking:
 

Mach1Marauder

Well-Known Member
dont forget an anti roll bar :rock:

Naaaa..............you don't NEED one to run 10s in that car........disconnect the front swaybar....yes
Anti-rollbars are hard to intergrate with that suspension. UNLESS you remove the Panhard bar and replace it with a wishbone type setup to control lateral location of the rear.
 

02gt

Well-Known Member
Naaaa..............you don't NEED one to run 10s in that car........disconnect the front swaybar....yes
Anti-rollbars are hard to intergrate with that suspension. UNLESS you remove the Panhard bar and replace it with a wishbone type setup to control lateral location of the rear.

seems that the rear on thing has alot of bounce and play in it, when i put my anti roll bar on, it is solid as rock when i launch, very effective suspension piece...
 

Mach1Marauder

Well-Known Member
seems that the rear on thing has alot of bounce and play in it, when i put my anti roll bar on, it is solid as rock when i launch, very effective suspension piece...

His suspension(shocks) were set too soft. Anti-rollbar has little to do with that part.
 
Top