blow through set up

[02gt]

I have a 02 gt that im building up in the very near future, i have decided to go to a blow though set up on my vortech, i have plans to make at least 500 rwhp with my s trim and possibly some ported heads and cams, i was looking at your set up on your site and i like the 75mm housing and was sort of unclear about the sensor, i want to run 60 lb injectors, are the sensors calibrated to except a certain size injector? And what kind of price can you give me for a complete blow through set up? Thanks :rock:

 

[02gt]

Nothing???????

 

[wickedstangs]

need to setup his email give me a minute..

 

[02gt]

werd...

 

[yosemiddysam]

Any "werd" yet?

 

[02gt]

Any "werd" yet?

nope nothin....

 

[Justin@VMP]

Even if I was not having a baby, you would need to email me directly or call me and talk to me to get a response that quick.

In the modern age where we have full control of the PCM, all tuning for injectors is done in the PCM, and not with calibrated MAFs. So now the goal is just to use a maf that has enough range for the given tube size and airflow/hp goal.

The HPX sensor is the one i would recommend:
http://www.vmptuning.com/store/index.php?p=product&id=193&parent=30

you can use one of my flanges to weld it right onto the tube like this:
http://www.vmptuning.com/store/index.php?p=product&id=32&parent=31

or use my entire housing:
http://www.vmptuning.com/store/index.php?p=product&id=230&parent=99

 

[boostedmach]

I have this setup, and its very nice. PMAS is his tube.