• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Catch Can, Breathers and PCV

Shane361

Well-Known Member
Curious on some of your guys take on my set up. My performance shop threw in a catch can as I asked but threw a breather on the pasenger side. Isnt this letting in unmetered air? Thinking I should run a hose from the passenger side around the back of the engine and T into the driver side which will send both into the catch can. Thoughts? -Shane
185.jpg

184.jpg
 

boostedmach

Well-Known Member
Thats setup just fine, Your PCV is just that Positive Crank case Ventilatoin, so its sucking on your crank case, and any oil mist is captured by your air/oil seperator. Now on the other side, where there used to be (stock) a hose going to your instake (always under vacuum) there was no pcv, so a breather there is just fine, as it will let air in...and possibly out (if there is any blow by).

-Boosted
 
Top