• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

clunking sound from front suspension

IgottaV8

Wickedstangs Road Racing Team
Staff member
Moderator
Board Member
I just put in the tubular K-member and 03/04 cobra A-Arms in, and when I turn the wheels close to its max, and I'm moving, I get a weird clunking sound, it is worrying me a bit. Does anybody have any ideas why it is doing this? Or a way to figure out?
 

ears

Well-Known Member
well somethin is definately rubin,,, we know that.. so rotate the wheels a bit and see if anything comes close to anything that would move as your drivng
 

orange395w

OG MEMBER
Staff member
I just put in the tubular K-member and 03/04 cobra A-Arms in, and when I turn the wheels close to its max, and I'm moving, I get a weird clunking sound, it is worrying me a bit. Does anybody have any ideas why it is doing this? Or a way to figure out?

Lift the front of the car turn the wheel all the way to one side and spin the wheel. I don't know? That's what I would do. You probably should have checked stuff like that when you installed it. The wheels may be rubbing on the a-arms.
 

IgottaV8

Wickedstangs Road Racing Team
Staff member
Moderator
Board Member
Well, by the time I got finished, they were already kicking people out. So I didn't have time to do any double checking.
 

ears

Well-Known Member
rough dude,,, well get to it,,, see if your getting any rubbing or anything is comin close!!
 

atlblue98gt

Greer, SC
Lift the front of the car turn the wheel all the way to one side and spin the wheel. I don't know? That's what I would do. You probably should have checked stuff like that when you installed it. The wheels may be rubbing on the a-arms.

i was about to say just that
 

atlblue98gt

Greer, SC
Well, by the time I got finished, they were already kicking people out. So I didn't have time to do any double checking.

what do you mean not enough time. You always have to allow time for double checking. That would justify a waste of time if it isnt done right the first time.
 

orange395w

OG MEMBER
Staff member
what do you mean not enough time. You always have to allow time for double checking. That would justify a waste of time if it isnt done right the first time.


Alot of members do the work @ Mirimar Air Station (Military Base) Hobby shop. They have working hours.
 

Ford1288

Well-Known Member
Donator
Is it coming from the front? After I installed my motor mounts this weekend it raised my engine and my exhaust was moved around, flowmasters started clunking against the body. Think its something like that?
 

IgottaV8

Wickedstangs Road Racing Team
Staff member
Moderator
Board Member
Is it coming from the front? After I installed my motor mounts this weekend it raised my engine and my exhaust was moved around, flowmasters started clunking against the body. Think its something like that?

Actually, it did raise my engine up just a bit, this Sunday I will get under it and check it out. Thanks for all the advice guys, I'll let you know what I find out.
 
Top