Ok So every one knows this car and what it has done to it. I think my life is heading in a new direction I think, and I am looking into possibly selling her.
I have done fixed some thing on this car or will have before the next person buys her. New carpet, sound deadener,, SS brake lines, Through the floor sub frame connectors, . AC works now. I wanted the perfect street car (don't we all) so she drives like a dream, Sounds great inside and out not to raspy like she used to be. She has 120k on the clock. Also have MM K member with offset a arms and steering rack bushings and HD torque arm not yet installed. This car literally has every suspension mod you can think of. I won't be home till around Oct so that I when I will be looking for a posible buyer.
f your interested keep posting if not keep it to yourself no its not the fastest mustang. yes its one of the best handling and has a great base for engine and power adder then its done. i did it the other way around then what everyone else did power adder then other stuff. best time at barona was 8.7 and best at the Q was 8.4 not bad for a N/a car. and i didnt launch anytime above 2k
mod list:
Engine/Performance mods:
- 4.10 CRYO treated FRPP gears
- SPEC Billet steel flywheel
- Brand New t-56 tranny w/ upgraded 26 spline input shaft
- MSD 8.5 Super Conductor Spark Plug Wire
- MSD Blaster Coils Packs
- RUSSELL Steel Re-in forced Brake Lines(not installed)
- Hawk HPS street brake pads
- Power Master Battery
- MGW Short Shifter
- Custom Aluminum drive shaft
- FRPP Drive shaft safety loop
- Upgraded steel bell housing
- TA rear end girdle
- Steeda Mil Eliminators
- Steeda Under drive Pulleys
- Steeda Oil Separator kit
- Steeda clutch cable, firewall adj kit
- BBK Off Road X-pipe
- Energy Suspensions Polyurethane Engine mounts
- JLT TRU Cold Air Intake
- Flow master custom exhaust
- HD King Cobra Clutch Kit
- Yukon heavy duty axle
- Baer Decela Rotors front and rear
- Ford Racing Shorty Headers
- Traction-LOK rebuild kit
- Prothane Transmission mount
- SCT X-Calibrator 3
- CR1 Corbeau Microsuede seats (black) left and right
- 3" 5 point harness Corbeau (black) left
- adjustable lumbar left and right
- 5th slot addition both seats
- Corbeau seat tracks
- Nitto 305/35ZR-18 101Y B NT 555R Drag Radial (rear)
- Nitto 265/35ZR-18 93W B NT 555 Extreme Performance (front)
- CANTON Expansion Tank
Suspension Mods:
- MM adjustable rear lower control arms
- MM Front Coil Over Kit w/ hypersprings
- MM Rear Coil Over Kit w/ hypersprings
- MM panhard bar
- MM full length sub-frame connectors
- MM 4 bolt caster/chamber plates
- MM pinion snubber
- Steeda X2 Balljoints
- Steeda Bumpsteer kit
- Steeda Shock Tower Brace
- Polyurethane Offset Rack Bushings
- Camber Adjustment bolt kit
- Bilstein axle wrap shocks-
- Bilstein HD shocks and struts
- Eibach front sway bar(anti roll kit)
- Eibach rear sway bar(anti roll kit)
- Prothane bushings for sway bars
- Polyurethane exhaust hangers
- Lakewood upper control arms
Appearance mods:
- Steeda Black Shift knob
- Sequential tail light kit
- Black lug nut set
- 8" shorty antenna
- GTS Smoked headlight covers
- Shaved bumper down 3 black with 2 clear coats on front
- Black Angel Eye Projectors
- Luminics Pure White H3 Mustang Light Bulbs
- Luminics Pure White 9005 Mustang Light Bulbs
- American Muscle Rear Seat Delete kit
- Black FR500 (18x9) front
- Black FR500 (18x10) back
- Smoked Fog Lights
- Gray Cobra emblem trunk liner
- Saleen S281 style wing(not installed)
- FRPP Competition Shift Light Tachometer
- Gen 2 Smoked Tail lights
- CERVINI Cobra "R" 3.5" fiberglass hood
and since then has
MM HD TQ arm kit
MM Kmember w/ A arms
new carpet and sound deadner
I have done fixed some thing on this car or will have before the next person buys her. New carpet, sound deadener,, SS brake lines, Through the floor sub frame connectors, . AC works now. I wanted the perfect street car (don't we all) so she drives like a dream, Sounds great inside and out not to raspy like she used to be. She has 120k on the clock. Also have MM K member with offset a arms and steering rack bushings and HD torque arm not yet installed. This car literally has every suspension mod you can think of. I won't be home till around Oct so that I when I will be looking for a posible buyer.
f your interested keep posting if not keep it to yourself no its not the fastest mustang. yes its one of the best handling and has a great base for engine and power adder then its done. i did it the other way around then what everyone else did power adder then other stuff. best time at barona was 8.7 and best at the Q was 8.4 not bad for a N/a car. and i didnt launch anytime above 2k
mod list:
Engine/Performance mods:
- 4.10 CRYO treated FRPP gears
- SPEC Billet steel flywheel
- Brand New t-56 tranny w/ upgraded 26 spline input shaft
- MSD 8.5 Super Conductor Spark Plug Wire
- MSD Blaster Coils Packs
- RUSSELL Steel Re-in forced Brake Lines(not installed)
- Hawk HPS street brake pads
- Power Master Battery
- MGW Short Shifter
- Custom Aluminum drive shaft
- FRPP Drive shaft safety loop
- Upgraded steel bell housing
- TA rear end girdle
- Steeda Mil Eliminators
- Steeda Under drive Pulleys
- Steeda Oil Separator kit
- Steeda clutch cable, firewall adj kit
- BBK Off Road X-pipe
- Energy Suspensions Polyurethane Engine mounts
- JLT TRU Cold Air Intake
- Flow master custom exhaust
- HD King Cobra Clutch Kit
- Yukon heavy duty axle
- Baer Decela Rotors front and rear
- Ford Racing Shorty Headers
- Traction-LOK rebuild kit
- Prothane Transmission mount
- SCT X-Calibrator 3
- CR1 Corbeau Microsuede seats (black) left and right
- 3" 5 point harness Corbeau (black) left
- adjustable lumbar left and right
- 5th slot addition both seats
- Corbeau seat tracks
- Nitto 305/35ZR-18 101Y B NT 555R Drag Radial (rear)
- Nitto 265/35ZR-18 93W B NT 555 Extreme Performance (front)
- CANTON Expansion Tank
Suspension Mods:
- MM adjustable rear lower control arms
- MM Front Coil Over Kit w/ hypersprings
- MM Rear Coil Over Kit w/ hypersprings
- MM panhard bar
- MM full length sub-frame connectors
- MM 4 bolt caster/chamber plates
- MM pinion snubber
- Steeda X2 Balljoints
- Steeda Bumpsteer kit
- Steeda Shock Tower Brace
- Polyurethane Offset Rack Bushings
- Camber Adjustment bolt kit
- Bilstein axle wrap shocks-
- Bilstein HD shocks and struts
- Eibach front sway bar(anti roll kit)
- Eibach rear sway bar(anti roll kit)
- Prothane bushings for sway bars
- Polyurethane exhaust hangers
- Lakewood upper control arms
Appearance mods:
- Steeda Black Shift knob
- Sequential tail light kit
- Black lug nut set
- 8" shorty antenna
- GTS Smoked headlight covers
- Shaved bumper down 3 black with 2 clear coats on front
- Black Angel Eye Projectors
- Luminics Pure White H3 Mustang Light Bulbs
- Luminics Pure White 9005 Mustang Light Bulbs
- American Muscle Rear Seat Delete kit
- Black FR500 (18x9) front
- Black FR500 (18x10) back
- Smoked Fog Lights
- Gray Cobra emblem trunk liner
- Saleen S281 style wing(not installed)
- FRPP Competition Shift Light Tachometer
- Gen 2 Smoked Tail lights
- CERVINI Cobra "R" 3.5" fiberglass hood
and since then has
MM HD TQ arm kit
MM Kmember w/ A arms
new carpet and sound deadner
