• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Misc GT parts

02gt

Well-Known Member
I have:
PI manifold 100
102_1178.jpg

upper and lower control arms granetelli (need new bushings) 60
102_1182.jpg

17x8 stock gt wheels 100
102_1186.jpg

stock 28 spline limited slip diff 50
stock gt axles 50
102_1092.jpg

stock torch red gt hood 100
102_1185.jpg

stock fuel tank W/O fuel pump 25
102_1113.jpg

255 LPH fuel pump 75
102_1115.jpg

15x8 wheels used them for drag racing 50
102_1098.jpg

moroso trick drag springs (cut) 60
102_1096.jpg




i will also be selling a set 42 lbers with a 90 mm maf, stock PI heads, and possibly the sb from my car after i do the swap.
email me at mounder27@yahoo.com
 

02gt

Well-Known Member
they both are cut, the taller one goes in the rear passenger side, it's taller because it will help with the body roll...
 

Foxman

Well-Known Member
if the wheels sale falls through let me know... how much shipped on the 15x8 steel wheels? ned them for my 5 lug swap>

lemoore, ca 93245
 

Xodus989

Well-Known Member
Possibility on the axels. My wheel bearing has been **** for a while, and I haven't had a chance to fix it... It won't be soon, not until 2010 when I would pick them up...

Edit: And I"m unsure if i'll actually need new axels, I haven't pulled them out yet.
 

Tommy

New Member
Possibility on the axels. My wheel bearing has been **** for a while, and I haven't had a chance to fix it... It won't be soon, not until 2010 when I would pick them up...

Edit: And I"m unsure if i'll actually need new axels, I haven't pulled them out yet.


The bearings are a relatively simple fix. Try to get on schedule with an install day at the Miramar hobby shop. Plenty of knowledgeable "techs" that can lend a hand here. Bearings are no more than $10 each side. You'll also need diff fluid (and friction inhibitor) and seal, since you have to open diff to get axles out.
 

Xodus989

Well-Known Member
The bearings are a relatively simple fix. Try to get on schedule with an install day at the Miramar hobby shop. Plenty of knowledgeable "techs" that can lend a hand here. Bearings are no more than $10 each side. You'll also need diff fluid (and friction inhibitor) and seal, since you have to open diff to get axles out.

I don't know if the bearings have worn into the axel though, I have feeling they have since I've been putting it off...

And as far as getting onto the Miramar Hobby shop, I'm civvy, so I'm not sure if I can get on base.
 

Tommy

New Member
I don't know if the bearings have worn into the axel though, I have feeling they have since I've been putting it off...

And as far as getting onto the Miramar Hobby shop, I'm civvy, so I'm not sure if I can get on base.



I'm civvy too. All you have to do is sign in at the gate. I always list MustangCWO as a sponsor, since it sounds cool to throw his rank around lol!
 

DSGimportslayer

DSG in the hisouse!
Staff member
I'm civvy too. All you have to do is sign in at the gate. I always list MustangCWO as a sponsor, since it sounds cool to throw his rank around lol!

+1 ive mentioned i have a friend thats a CWO4 and thats big. because you know that they have advanced 6 times from E-1 and they have been in for a while. alot of knowledge, with the warrant officers. i think we should have more in the navy well anyway, xodus i have a slide hammer if you need it. i had to buy it when i changed the wheel bearings in the 02 gt i had. you are more than welcome to use it if you need it.:rock:
 

02gt

Well-Known Member
i still have them but emilio is supposed to get me a shipping quote and has not done so, i think i may have ship them at regular price ill have a quote for you tomorrow for sure
 

02gt

Well-Known Member
yes just got back from the post office 17 per wheel to your zip....im just having a hard time finding boxes for the wheels, every one wants to charge which i may pay for them.....
 

atlblue98gt

Greer, SC
ill have to pass on the 17s. There your if you want them foxman. Prolly look good on a fox. Either stock or painted black. Thats a great price iy you can pick them up. Shipping would be as much as the rims to ship to sc. Im still taking the diff though.
 
Top