Help!! IRS Diff ready to come out!

[xavier296]

Hey guys, I need some help, I have everything off and am 2 bolts away from having the differential out of my DSG for a bushing replacement, reseal, and brace, but I am not keen on taking it out by myself. I am begging for one other person to come over for the 15 minutes it would take to drop it out. I won't be putting it back in for a few days after the permatex has cured, so I only need help dropping it down for now. Thanks to anyone who might have an hour for the drive and work and drive back. Call me.

843-503-5724
6248 Childs ave
San diego, CA 92139

 

[lowlow]

when did ya want someone there i would be willing to help ya

 

[0ne_sik_notch]

i used a cheepy autozone jack. i dont have people helping me at all lol

 

[xavier296]

low, tonight if you have the time. I realize I may be able to do it without help, and it WOULD end up on the ground, but thats not my preference.

 

[lowlow]

i can come now if ya want me to

 

[xavier296]

awesome, I would really appreciate it. Shouldn't take long.

 

[yosemiddysam]

Dude you know I would be there with a quickness if I was there. Let me know how this goes cause I wanna do it to mine as well. Plus I need to install the IRS Brace I bought over a year ago.

 

[lowlow]

everything went pretty good was a little tricky getting it out but all is well and its out with nothing broke lol

 

[xavier296]

Man, It was way harder than the directions make it sound. Thanks so much to lowlow since the pumpkin is on the ground now ready for new sealant, the billetflow brace, and poly bushings. And the fuel tank is on the ground too for the installation of the pprv delete and maybe the ford GT pumps I have had sitting on the shelf for half a year. And before I have it all done I will be installing my lower pulley setup. Too much to do, too little time to do it.

 

[lowlow]

no big deal man like i said anytime just call me im always willing to help another out cause what goes around comes around so

 

[yosemiddysam]

Damn dude you should just send me a plane ticket home and we could get to turning wrenches. lol. Man I wish I was there to help you. You need to get your orders mod'd so you are there when I get home. Oh and which bushing kit did you go with. I wana switch mine out too. I have been thinking about going with the kit that the guy makes on SVT Performance. I am also getting MM XL sub frames.

 

[xavier296]

I bought the MM bushings, I will tell you how well they fit, but the delrin SVT ones look very nice too, I might have gone with those if I had seen them before I bought the ones I have.

 

[Mustangcwo]

no big deal man like i said anytime just call me im always willing to help another out cause what goes around comes around so

Low low, thanks for picking up the slack while many of us are away. It's people like you that make this club the best in the world.

Aaron, slow down my friend. I dont even have 400HP yet and you're already building the rear end sturdier and working the hooking issue. Let us little guys gain a little ground once in awhile......GREAT MODS....keep it up. Lets go EVERYONE, August is right around the corner.