Ideas for the future?

[VP_07SRT8]

Well i just ordered MM front and rear stainless steel brake lines and a fluidyne radiator. what else should i get before i get the big stuff i.e engine, turbo kit, tranny?

 

[Bullitt5055]

you already have good suspension?

 

[VP_07SRT8]

lol here is my current mod list:
Engine/Performance mods:
- 3.27 FRPP gears (4.10's being installed Sept 20th @ CPR)
- FRPP AC Delete Kit
- 11" Chrome moly Flywheel
- Brand New t-45 Tranny
- MSD 8.5 Super Conductor Spark Plug Wire
- MSD Blaster Coils Packs
- Steel Re-in forced Brake Lines
- Hawk HPS street brake pads
- Power Master Battery
- Steeda Tri-ax Short Shifter
- Steeda Mil Eliminators
- Steeda Under drive Pulleys
- Steeda Oil Separator kit
- Steeda clutch cable, firewall adj kit
- BBK Off Road X-pipe
- Energy Suspensions Polyurethane Engine mounts
- JLT TRU Cold Air Intake
- Flow master custom exhaust
- King Cobra Clutch Kit
- Yukon heavy duty axle
- Baer Decela Rotors front and rear
- Ford Racing Shorty Headers
- Stage 8 titanium exhaust bolts
- SCE Pro Copper Exhaust Gaskets
- Traction-LOK rebuild kit
- CANTON Racing Products Windage Tray Kit(not installed yet)
- Prothane Transmission mount
- SCT X-Calibrator 3
- CR1 Corbeau Microsuede seats (black) left and right
- 3" 5 point harness Corbeau (black) left and right
- adjustable lumbar left and right
- 5th slot addition both seats
- Corbeau seat tracks
- Nitto 305/35ZR-18 101Y B NT 555R Drag Radial (rear)
- Nitto 265/35ZR-18 93W B NT 555 Extreme Performance (front)
- CANTON Expansion Tank

Suspension Mods:
- MM adjustable rear lower control arms
- MM Front Coil Over Kit w/ hypersprings
- MM Rear Coil Over Kit w/ hypersprings
- MM panhard bar
- MM 4 point K-member brace
- MM full length sub-frame connectors
- MM 3 bolt caster/chamber plates
- MM pinion snubber
- Steeda X2 Balljoints
- Steeda Bumpsteer kit
- Steeda Shock Tower Brace
- Polyurethane Offset Rack Bushings
- Camber Adjustment bolt kit
- Bilstein axle wrap shocks-
- Bilstein HD shocks and struts
- Eibach front sway bar(anti roll kit)
- Eibach rear sway bar(anti roll kit)
- Prothane bushings for sway bars
- Polyurethane exhaust hangers
- Lakewood upper control arms

Appearance mods:
- Steeda Black Shift knob
- Black lug nut set
- 8" shorty antenna
- 3rd brake light "COBRA"
- GTS Smoked headlight covers
- Shaved bumper down 3 black with 2 clear coats on front
- Black Angel Eye Projectors
- Luminics Pure White H3 Mustang Light Bulbs
- Luminics Pure White 9005 Mustang Light Bulbs
- American Muscle Rear Seat Delete kit
- Black FR500 (18x9) front
- Black FR500 (18x10) back
- Smoked Fog Lights
- Gray Cobra emblem trunk liner
- Saleen S281 style wing(not installed)
- FRPP Competition Shift Light Tachometer
- Gen 2 Smoked Tail lights
- Sequential tail light kit

 

[VP_07SRT8]

ive done a couple things to the suspension

 

[beejay31000]

hey Mr. Moneybags, share the wealth. itk, ignition parts is what i would go for. maybe interior dress up, i'e gauges

 

[VP_07SRT8]

im not into interior though and really exterior for that matter. i like the way it looks now. what kind of ignition? i already did coil packs and spark plug wires MSD

 

[beejay31000]

i dont know, not familiar with your car. wither that or an upgraded fuel system for the future.

 

[fangs99]

31 spline axels and a electric locker diff. to plant all that power.

 

[02gt]

mezire electric water pump

 

[orange395w]

Your done, just save for the big stuff.

 

[02gt]

Turbo

 

[VP_07SRT8]

Your done, just save for the big stuff.

i like that idea!

water pump is on my mind as well

 

[VP_07SRT8]

i already have yukon HD axle