• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Install party!!

xavier296

xavier296

Well-Known Member
Fresh on the heels of a great time at Barona, all my parts are finally in and I am going to spend the next 2 days getting them installed at my house. To be installed:
Mcloed RST Twin Disc
2.3 Whipple
2400 Maf
60 lb injectors
And all supporting parts.
Any and all are welcome to join in on the fun, even though I realize most people are working. I just happen to have this monday and tuesday off. Just wanted to share my excitement! I have all tools, and have done a T56 clutch job alone before, but it certainly isn't fun.
Aaron
843-503-5724
 
xavier296

xavier296

Well-Known Member
Gotta find a picture server, cause the whipple is in. Still have supporting pieces to install, but the heavy work is done. I have duty tommorrow, but thursday I drive! I think Yosemiddy is coming to help finish it up. Thanks for the offers, I got too wrapped up in car work to even check the internet!
 
yosemiddysam

yosemiddysam

Well-Known Member
Donator
Yeah and the whipple is a beotch to get to fit back in. Me an Aaron tried everything to get that bastard in without taking the lower intake off but in the end I gave in and took it out. I am sure some good install pics will soon arrive.
 
yosemiddysam

yosemiddysam

Well-Known Member
Donator
Oh and I think we got the big lines in back crossed judging by mine. The one that is over rthere should be going to the back of the blower. Mine looks like it goes over closer to that side as well.
 
xavier296

xavier296

Well-Known Member
You guys are missing out: You already missed the fun part of lifting that big girl in, now its just finishing her up. I hope. I do still have a clutch to install though. Sam wants to go to Miramar to use a lift, and I am thinking thats a good idea. Anybody got their own home lift? <---- Now thats my personal dream. Man, duty days suck!
 
W

wickedstangs

Guest
xavier296 said:
Gotta find a picture server, cause the whipple is in. Still have supporting pieces to install, but the heavy work is done. I have duty tommorrow, but thursday I drive! I think Yosemiddy is coming to help finish it up. Thanks for the offers, I got too wrapped up in car work to even check the internet!
Click to expand...

email them to me I will host them.. gmntmare@cox.net
 
yosemiddysam

yosemiddysam

Well-Known Member
Donator
Hey Aaron I tried to call you and it said your number was no longer in service???? Are you ready to hit the car again?
 
yosemiddysam

yosemiddysam

Well-Known Member
Donator
Ok now when I call it goes straight to your voice mail. Give me a call when you are ready. I dont wanna drive all the way there if you are not there or working on the car.
 
M

Mustangcwo

Guest
Aaron, call me if you're headed to Miramar to do that clutch today. Number is 858-245-4570.
 
xavier296

xavier296

Well-Known Member
Done, done, done! Started her up this afternoon with nary a problem. Got the boost-a-pump installed also. Going tommorrow to have it tuned, even though she is plenty strong right now. Just want to ensure I am not going to fry any pistons! I just hope my centerforce doesn't slip on the dyno, cause the twin disc isn't in yet.
For all of you with no whipple experience, it is MUCH quieter than I thought. I would say quieter than a stock pulley eaton even though it makes 15 psi.
In terms of numbers, I am hoping for 500-550 rwhp.
 
You must log in or register to reply here.
Top