W
wickedstangs
Guest
Alright guys
I think we may have found our race car. CWO and I are going to go look at it again tomorrow.
Tell you a little bit about it:
Its a 1988 LX Hatchback and been sitting for a long time
and needs our loving care... I went today to look at it and it has the potential. It was going to be set up as an all drag car but, the owner ran out of money for it. There is tons of parts on this car :D I will list some at the end. Lets keep are fingers crossed and see what comes of it.
After inspecting the car these are things I noticed.
1. Tubular "K" Member
2. Tubular A-Arms
3. Aeromotive A1000 Back Half Fuel System Kit
4. UPR upper control arms
5. Drag Racing Rear Control arms
6. 90/10 Struts front
7. 50/50 in the rear
8. Brand New Slicks mounted on Rims
9. Car been converted to 5 lugs.
10. Set of Chrome Steeda wheels. (Need Polishing Bad)
11. All the wire have been relocated to the Firewall, and behind the Dash has been cleaned not heater core and only the necessities.
12. There is a Tweecer Chip on the car ready to connect to a laptop.
13. 8pt Roll Cage welded in professinally.
14. Aluminum Drive Shaft
15. Brand New Rear End Gears.
16. Subframe connectors (Real Nice Ones)
There is alot more except we don't have the fund for
Hopefully this will work for what we want..
Keep you posted..
I think we may have found our race car. CWO and I are going to go look at it again tomorrow.
Tell you a little bit about it:
Its a 1988 LX Hatchback and been sitting for a long time

After inspecting the car these are things I noticed.
1. Tubular "K" Member
2. Tubular A-Arms
3. Aeromotive A1000 Back Half Fuel System Kit
4. UPR upper control arms
5. Drag Racing Rear Control arms
6. 90/10 Struts front
7. 50/50 in the rear
8. Brand New Slicks mounted on Rims
9. Car been converted to 5 lugs.
10. Set of Chrome Steeda wheels. (Need Polishing Bad)
11. All the wire have been relocated to the Firewall, and behind the Dash has been cleaned not heater core and only the necessities.
12. There is a Tweecer Chip on the car ready to connect to a laptop.
13. 8pt Roll Cage welded in professinally.
14. Aluminum Drive Shaft
15. Brand New Rear End Gears.
16. Subframe connectors (Real Nice Ones)
There is alot more except we don't have the fund for

Keep you posted..