• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

underdrive pullies

justin11045

Well-Known Member
got some new steeda underdrive pullies from Wicked_SVT (thanks again by the way) , wanted to set up a day on the weekend or something to see if anyone could help me put them on. never done it before and dont want to jack my car up. let me know when is a good time for anyone.
 

justin11045

Well-Known Member
i was looking somewhere how to do it and it said i put the harmonic balancer over the other one because it would throw the crankshaft out of balance. correct?
 

blackstallion06

Everrett Wa. Soon to be St. Louis MO.
Donator
It depends ot the ones you bought. Some of them attach to the pully you are correct and some replace the stock pullys. Its a no brainer replacing them just make sure when they say dab some RTV on bolt and reapply stock bolt into new pully you gob it on there. I have a leak on my lower from spraying. You can rent a gear puller from Auto Zone and you just need basic hand tools. This is a easy way to free up HP good buy.
 
I

Ichiduo

Guest
Ive never done pullies, im no help here.

it's a good thing too, pullies are not recommended for machs.

as for installing pullies, i did them on my old new edge v6. basically what black stallion said. you need a pulley puller and a serpentine tool wouldn't hurt either.
 

blackstallion06

Everrett Wa. Soon to be St. Louis MO.
Donator
You dont need a serp tool just use a breaker bar. Talk to Foxman he could install them in 1/2 hour if that I am sure
 
I

Ichiduo

Guest
You dont need a serp tool just use a breaker bar. Talk to Foxman he could install them in 1/2 hour if that I am sure

i have one. you don't need one, just helps a lil. if you're already renting a pulley puller, why not? hobby shop SHOULD have all the hand tools you need though.
 

justin11045

Well-Known Member
its an 01-gt nothings wrong with it. just get some better cooling along with another job that is in the same area.
 
Top