-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
banner on lightning.
- Thread starter tkeinia
- Start date
sdsubzero4
Spring Valley, CA
Not too bad, but I do notice its slightly off on the passenger side.
sdsubzero4
Spring Valley, CA
That would explain it.
Measure it and send me the size you want..
tkeinia
Well-Known Member
across the top it is 54 inches. i would think about 50 inches wide to give me about 2 inches of play on each side.
i would like the custom banner with support vehicle under the wicked stangs banner. email me your addy so i can send u a money order for the banner and shipping.
i would like the custom banner with support vehicle under the wicked stangs banner. email me your addy so i can send u a money order for the banner and shipping.
tkeinia
Well-Known Member
i was thinking if 50 across it to wide maybe 44 to 46 across and about 4.5 height?
what ever works better for the lettering not to be streched out.
if possible can u put up an example of what it would look like, in maybe a blue that would better match the lightning on the hood or in carbon fiber if you have it. thanks
what ever works better for the lettering not to be streched out.
if possible can u put up an example of what it would look like, in maybe a blue that would better match the lightning on the hood or in carbon fiber if you have it. thanks