Feared
Crazy Mach Driver
Here is the write up I did on my Exhaust install.
Basic tools are needed..
1) Take Your brand new exhaust out of Package, and make sure everything is there.
2) Jack up your car, and use jackstands!
3) Remove Wheels.
4) Remove the bolts at the rear of the H pipe.
5)Since i decided not to cut my exhaust, this install was a little harder than most. I had to disconnect the shock from the axle, the other suspension link you see in the picture, and i also needed to disconnect the upper control arm just to get clearance to manuever the old exhaust out. Also when you remove your old exhaust from the hangers, use a lubericant to get them off. I had trouble with mine, and i used WD-40.
6) Install new exhaust, SLP provided easy instuctions to install. Just remember to install everything loose, so that you can come back and adjust if needed. AND you WILL need to adjust your pipes.
7) Repeat for the other side.
8) Install all of your suspension. Then tighten your exhaust clamps when you are happy with the fit.
9) Install your wheels. Put your car on the ground, and look at the difference!
The hardest part was removing the old exhaust, just make sure you life your car high enough, and you wont have any problems.
sound clip..
Basic tools are needed..
1) Take Your brand new exhaust out of Package, and make sure everything is there.
2) Jack up your car, and use jackstands!
3) Remove Wheels.
4) Remove the bolts at the rear of the H pipe.
5)Since i decided not to cut my exhaust, this install was a little harder than most. I had to disconnect the shock from the axle, the other suspension link you see in the picture, and i also needed to disconnect the upper control arm just to get clearance to manuever the old exhaust out. Also when you remove your old exhaust from the hangers, use a lubericant to get them off. I had trouble with mine, and i used WD-40.
6) Install new exhaust, SLP provided easy instuctions to install. Just remember to install everything loose, so that you can come back and adjust if needed. AND you WILL need to adjust your pipes.
7) Repeat for the other side.
8) Install all of your suspension. Then tighten your exhaust clamps when you are happy with the fit.
9) Install your wheels. Put your car on the ground, and look at the difference!
The hardest part was removing the old exhaust, just make sure you life your car high enough, and you wont have any problems.
sound clip..
