• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Emissions Delete Reference?

M

Mustangcwo

Guest
I'm purchasing a MAC prochamber exhaust and I plan on removing the smog pump, EGR and all associated emission devices. Does anyone have the information required to make this mod or know of a good source that provides the required information?
 
M

Mustangcwo

Guest
Thanks for the link, but I'm looking for more of a how to and what needs to be installed. I'm not worried about belt length, I have a smog pump delete pulley.
 
W

wickedstangs

Guest
if you have that smog pump delete pulley that is all you need..
 
dope3

dope3

Well-Known Member
either buy the smog delete setup to make it and idler, or do as i did and route around it, here is a belt routing chart for most all setups on a 5.0, and all the smog crap prolly weighs 35lbs or more.
the plugs that go into the back of the heads are called thermactor plugs. i bought mine from trickflow but i think they sell them at napa too. shouldnt be more than about 5 bucks a piece.
what about the air tube on the h-pipe? what do i do about that?
bend it over/crimp it off, weld a cap on it ect, whatever really
 
M

Mustangcwo

Guest
Florida plates baby, run what you want!!!!!!!!!!!!!! FTMFW!!! I cant afford to waste horsepower and gas on smog devices. Have you seen the price at the pump...LOL:bo:
 
fangs99

fangs99

Well-Known Member
is florida home for you cwo? oh, did you ever get a hold of that guy or did he flake out?
 
M

Mustangcwo

Guest
fangs99 said:
is florida home for you cwo? oh, did you ever get a hold of that guy or did he flake out?
Click to expand...

Florida is home and I'll return there in 2010 to retire from the Navy.

Here is the plan. Install prochamber Monday, install smog delete Tuesday and cap off pipes and cap of vacuum line. From there I'll have to figure out EGR removal and the rest of the SMOG CRAP. Next month I'll order the Cat Back from MAC and that's it for this year. Somebody send me more MONEY!!!!!!:D
 
M

Mustangcwo

Guest
dope3 said:
well did what i sent you help you out cwo
Click to expand...

Yes it did. I already had a good idea of what I needed done. Just needed some confirmation. THANKS!!
 
orange395w

orange395w

OG MEMBER
Staff member
If I were you I wouldn't run the smog pulley at all. It's usless. Get a shorter belt, it's alot cleaner. I forgot the company that sells it, but you will need a dummy cannon plug that provides X amount of resistance to plug into the EGR wiring otherwise it will throw a code and the check engine light will come on. The other alternative is to disconnect it and leave it plugged in. Again, not very clean looking. I have a delet plate that I made for mine that you can have if you are interested or Accufab sells the EGR delete spacers. For the Exhaust you can get a short piece of high temp hose and put a plug in it and hose clamp it. The head plugs were already mentioned.

I think ebay sells the electronics for the egr delete. I'll check.
 
You must log in or register to reply here.
Top