Atomic Performance
Authorized Vendor
Hey Everyone, We are excited to announce that we just gotten the NEW Fore Precision Works Triple Pump Fuel Hat in stock. They are $420 shipped to your door. You will get the $10 off for being a forum member.
Need more fuel pump in your 03-04 Cobra? Don't want to weld in a sump or employ any other work around? Here's the solution! You GT owners don't need to worry, either as you can get a an '03 - '04 Cobra fuel tank and you're ready to go! It comes configured as a 2 pump setup but can be converted to a three pump by simply adding the conversion kit above.
Makes Ford GT supercar fuel pumps a BOLT IN installation. No more welding, caulking, or deforming your floorpan to clear pump outlets. Install GT pumps in a matter of minutes, rather than days. Accommodates up to three Ford GT supercar fuel pumps, triple, dual or single FPDM (Fuel Pump Driver Module), and OEM fuel sending unit. PPRV and restrictive in tank "Y" is eliminated. Pumps outlets are designed for optimal fuel delivery. Three pairs of 12 gauge, gas blocked conductors for fuel pumps for direct wiring to FPDM(s). Allows your Ford GT pumps to operate without losses from undersized OEM wires. (conductors conform to MIL-W-16878/4). Retains OEM fuel level sending unit with 18 gauge through conductors. (MIL-W-16878/4). No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and epoxy sealed through conductors. Submersible fuel line included. (conforms to SAE 30R10). Assembly is pressure tested prior to shipping.
Please comtact me if you have any questions or would like to place the order. Thanks, AP
Need more fuel pump in your 03-04 Cobra? Don't want to weld in a sump or employ any other work around? Here's the solution! You GT owners don't need to worry, either as you can get a an '03 - '04 Cobra fuel tank and you're ready to go! It comes configured as a 2 pump setup but can be converted to a three pump by simply adding the conversion kit above.
Makes Ford GT supercar fuel pumps a BOLT IN installation. No more welding, caulking, or deforming your floorpan to clear pump outlets. Install GT pumps in a matter of minutes, rather than days. Accommodates up to three Ford GT supercar fuel pumps, triple, dual or single FPDM (Fuel Pump Driver Module), and OEM fuel sending unit. PPRV and restrictive in tank "Y" is eliminated. Pumps outlets are designed for optimal fuel delivery. Three pairs of 12 gauge, gas blocked conductors for fuel pumps for direct wiring to FPDM(s). Allows your Ford GT pumps to operate without losses from undersized OEM wires. (conductors conform to MIL-W-16878/4). Retains OEM fuel level sending unit with 18 gauge through conductors. (MIL-W-16878/4). No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and epoxy sealed through conductors. Submersible fuel line included. (conforms to SAE 30R10). Assembly is pressure tested prior to shipping.
Please comtact me if you have any questions or would like to place the order. Thanks, AP