Good shop in SD for fittings?

[xavier296]

Hey guys,
Looking for a shop that carries in stock auto fittings, like an earl's distributor. I mean AN and NPT etc. I need some connections and fuel lines and such, and hate ordering and worrying if they might work. Anybody know of some places?

 

[FordFanStan]

Try Industrial Liquidators in Kearny Mesa. We have bought Earl's fittings and stuff there for brake lines, but I don't know how much fuel and other styles they have? Hope that helps, FFS

 

[yosemiddysam]

Sounds like my kit didnt have all the fittings?????

 

[xavier296]

not even close, didn't even have a WOT switch. I had to use one from my kit, so now my kit is incomplete. I am working on it though.

 

[yosemiddysam]

Sorry man

 

[yosemiddysam]

Hey Aaron the bottle heater got shipped today. I also would like to know if it is too late to have a window switch instead of a WOT switch. I only want the spray to hit between 3 and 6 K. I will pay for the switch. Just order one and get with angel.

 

[yosemiddysam]

Also I dont think I will change the jets out often. I will not go higher than 75 so just use that one.

 

[yosemiddysam]

Just out of curiosity are you planning on putting it in the plenum? I have heard very good things about that!!!!

 

[yosemiddysam]

Oh and prices for the parts for this do not matter to me. I just want it safe!!!!!

 

[xavier296]

Not going in the plenum unless you really want me to drill your plenum!! I have done it before (drill into an intake manifold and then tap it), but I didn't realize that is what you were thinking. It is doable though, just let me know. I haven't modified anything yet.

You have to use a mechanical WOT switch also, it is mandatory along with a window switch. You only want the nitrous to shoot when the throttle is all the way down. I haven't found the exact window switch for our cars yet, but it is going to cost about 200 bones I think.

Did you get an email saying when the lethal stuff will arrive?

 

[orange395w]

X, you should be able to find what you need on prospect in Santee. Total performance has a lot of -AN fittings as well as fuel fittings and such. Fiber tech down the street will have alot of NOS stuff, such as fittings, jets and switches. I know that Yose said the bottle was full, so I just wanted to give you a heads up that they fill bottles at Fiber Tech as well.

Fiber Tech is open on Saturdays, but TP is not.

 

[xavier296]

thanks orange, that and IL should be able to take care of it.

 

[orange395w]

No problem. Hope you find what you need.

 

[xavier296]

I went to fiber tech and called IL, but neither of them has that small of a fitting. They both had some cool stuff in stock, but no tiny adapters. I think I know what to order know though.

 

[orange395w]

Sorry you didn't find what you were looking for. What fitting is it?

 

[xavier296]

1/16" npt to -4 AN. Its the 1/16 that is the problem, they have 1/8 all over the place. I am just going to order from summit.

 

[yosemiddysam]

Yeah Aaron. I have heard that people are getting the best results from going into the plenum. If you can do it that will be fine. I am cool with spending a few bones to make it the safest and best way possible. I do not want a nitrous back fire and the eaton going through the hood lol. The stuff from lethal should be there soon as well as the bottle heater.

 

[xavier296]

I'll go get the drill then...

 

[yosemiddysam]

Normally I would be worried but I know you can do it and I am not worried. If you need money prior to buying things just hit angel up!!!!!!