• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Goodies coming for the car.......

northerncountry

Well-Known Member
nice job Sub-z it looks like you should be able to get down the track just a tad bit faster now LOL enjoy and we will see ya soon.
 

yosemiddysam

Well-Known Member
Donator
Danny let me know when you go get tuned. I need a nitous tune as well and might just cruise up with ya.
 

02gt

Well-Known Member
danny i would try going with Spankin Time Motorsports, either one will get you good a tune, please avoid making another mistake by going to ANY shop down here....PLEASE!!!!!! I learned the hard way as you already know....
 

sdsubzero4

Spring Valley, CA
danny i would try going with Spankin Time Motorsports, either one will get you good a tune, please avoid making another mistake by going to ANY shop down here....PLEASE!!!!!! I learned the hard way as you already know....

I hear ya. Like I said before. Everything depends on scheduling. If I can get them on a weekend day, I'll drive out there. Weekdays are hard for me since I have to work "normal" days now.

Yeah if you go to a certain one down here I will disown you!!!!!!

Thanks. LOL!
 

02gt

Well-Known Member
how much PSI do you intend to run with the KB...i suggest go for the the kill and turn it up right off the bat will save you money in the long run on tunes...
 

sdsubzero4

Spring Valley, CA
how much PSI do you intend to run with the KB...i suggest go for the the kill and turn it up right off the bat will save you money in the long run on tunes...

According to KB, I can get an additional 140-160 rwhp on 9psi since I will have the intercooler. That's about max I will want since its the stock block and I will be pushing the max hp on that. Want to keep this block for a little while longer since it will be awhile before I can come up with money for a new block if this one goes.
 

maverick169v

WS Posting God
with a 9lb pulley mine made 10.5 psi at max boost. and on a reliable dyno made 380 ish. your not gonna be able to push anymore without a bigger fuel pump. with the boost a pump my stock pump was at like 93% duty cycle. also for 9 lbs your gonna need injectors. if you didnt buy the tuner kit they wont be included. but i agree crank the boost out the gate. get a fuel pump and run a 12 lb pulley. if you take to anyone other than greg im gonna let air out of your tires. lol.
 

maverick169v

WS Posting God
also what they dont tell you is if you need the big tube kit, or a power pipe. if you use your stock intake, like the kit suggests, your not touching 140-160. i made around 140 hp gain and that was with full exhuast, big tube kit, throttle boddy, 90 maf, injectors, etc. i dont wanna bare the bad news, but the expense wont stop with the blower. be ready to spend around another 2k to have it in, with all the right stuff, and done right. but its worth every penny. you will LOVE the kenne bell.
 

sdsubzero4

Spring Valley, CA
Yeah, I figured the install already. It comes with 36lb injectors, I have a 90mm MAF, 70mm TB, and the K&N. Probably will need to change the tube in that.
 

02gt

Well-Known Member
Sub i have my old 255 lph pump sitting in my garage, i pulled it out my tank because i went to a cobra tank set up, give it to ya for 75 bucks works great... but i dont think you will have any issues if you car isn't a DD, about 425(5 speed) to the wheels is the max on the bottom end and the tranny is good to about 500 ftlb tq, it happens to every one, you'll be happy for a little bit and after a while you gonna want more...
 

sdsubzero4

Spring Valley, CA
Sub i have my old 255 lph pump sitting in my garage, i pulled it out my tank because i went to a cobra tank set up, give it to ya for 75 bucks works great... but i dont think you will have any issues if you car isn't a DD, about 425(5 speed) to the wheels is the max on the bottom end and the tranny is good to about 500 ftlb tq, it happens to every one, you'll be happy for a little bit and after a while you gonna want more...

Cool....Let me think about it. Thanks.
 

sdsubzero4

Spring Valley, CA
First of my goodies have arrived today via FedEx.......

The Kenne Bell is now sitting in my house. Two boxes and they are f'ing heavy. LOL!

GMS diff cover should be here tomorrow and the converter should be in the next few days.
 
Top