-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Hurst install
- Thread starter JWALL
- Start date
wow, we have several with hurst shifters they should chime in soon
Foxman
Well-Known Member
what do you mean rattles... You will get more of a gear whine through it... but i dont know about any rattles......
Gear whine = awesome
The rattle happens when I floor it in 1st and 2nd. It sounds like something is loose but I dont know what it could be. I torqued all bolts down to roughtly 50-80ft-lbs. Should I tighten more? The bolts on the back of the shifter (under the car) and pretty small I didnt want to over towque them. They were a 5/16ths or something tiny like that.
Do these require a break in + retightening?
The rattle happens when I floor it in 1st and 2nd. It sounds like something is loose but I dont know what it could be. I torqued all bolts down to roughtly 50-80ft-lbs. Should I tighten more? The bolts on the back of the shifter (under the car) and pretty small I didnt want to over towque them. They were a 5/16ths or something tiny like that.
Do these require a break in + retightening?
I have one in my car and I installed one in my buddys car with no rattles. Not sure... Maybe its just stiff give it a few and see if it goes away if not go back in and retighten everything. I am going underway tommorow will check this thread when I get back