i need t get it right

[stang8u]

i just finished my 306 i need to get it tuned right it seems to have no low end power im running 30# injectors and they are verry touchy when it comes to fuel pressure i got it set at 35 psi and ther timing at 16 it drives fine you just need to push the gas down i little farther to get going than i like but when i mash it down im braking traction through 4th i wish i could have been there saturday but i was working on my car let me know about the next one and ill be there

 

[beejay31000]

ok.

 

[wickedstangs]

Bring it by we will look at it.. BJ I think he needs help troubleshooting his problem..

 

[beejay31000]

i was just gonna let him know about the next one. all his stuff sounds fine. 16 degrees might be a little advanced depending on the fuel tho.

 

[stang8u]

im trying to get the money this week to have it dyno tuned at gtr im hopeing to get at least 350 hp any less will be a dissapointment

 

[wickedstangs]

tell me what you have I will tell you if you are there..

 

[beejay31000]

yeah, i want to hear too.

 

[stang8u]

holley aluminum heads pro comp roller rockers trick intake 75 mm throttle body 76mm cnl inlet tube and mass air big lunati cam long tubes custom 3'' exhaust no cats the motor has no emissions equipment at all full on race car

 

[beejay31000]

whats the compression, stock?

 

[beejay31000]

350 is a lot of power...i got almost all you have except heads and cam (which counts for a lot) but more 100hp?

 

[stang8u]

stock

 

[stang8u]

stock but the motor is fresh and bored 30 over

 

[stang8u]

if it does not put out at least 350 somthing is wrong

 

[wickedstangs]

stang8u, your setup sound good it can be done with that stuff.. Good luck.. are the heads ported?

 

[wickedstangs]

My 306 had:
GT 40 upper and lower stage 3 port and polish
AFR 185
X-303 Cam
1.72 roller rockers
DSS Short Block
BBK Long Tubes 1 5/8

And my car dynoed 317 rwhp at The Dyno Shop and JBA

317rwhp + 10% drive train loss = 348 Flywheel HP

 

[stang8u]

i want to meet up with some one and check some stuff out and get some opininons and let some suff rip

 

[wickedstangs]

we having out meeting on the first wednesday of the month.. I will be posting the location tomorrow..

 

[stang8u]

ill be there need some help

 

[beejay31000]

oh, i thought you meant 350 to the wheels, not fly. cant wait to see the car tho man