Line lock

[blackstallion06]

Does anyone have a line lock? How hard was the install? What kind did you order?
I see alot of line locks on jegs: Hurst, B&M, ect. Which one meets the needs of a 06

 

[HisPony]

Thank you!

I have been wondering the same thing.

 

[DrunkFatguy]

I use an SLP setup but it's a single solenoid system, I don't use it much if at all but it does the Job if you find a need for it (like I get any time to go to the track on a weekend or better yet buy groceries without being worn the F@#$ out from work). I have heard that the Dual Solenoid system is the way to go but I have seen Granatelli stuff, BBR has their own setup which is the way I'd go as I just don't trust GMS parts too much. It's not too hard to Install as long as you know how to work on an ABS brake system or any brake system for that matter and some simple Electrical wiring . The big thing is getting the Air out of the brake system and the line connections don't Leak afterwards, other than that its easy.

 

[beejay31000]

good info

 

[gmantheman]

:shift: I am also thinking about buying line locks. I don't feel coordinated enough to do the clutch to brake step.

 

[Rioredsn8k]

The SLP Line Locks work well on the S-197's.

 

[1WKDRSH]

Good info.. I might be doin the same.

 

[IgottaV8]

I'll ask Gregg at RET when I go up there on thursday, he probably would know.

 

[yosemiddysam]

I have been thinking bout doing this as well. It is hard on rotors doing the whole break stand thing.

 

[blackstallion06]

Yeah my car is pulling a little to left now when I brake hard. I am going to up grade roters at same time when I do new brakes. Proaly right after x-mas. I am going to get the L/L at same time so I quit the wear and tear on brake system

 

[DrunkFatguy]

Hey I don't normally deal with Tuners in SD but I've heard RET has been pretty good to you guys, Where is he located or some contact info. I may be biting the bullit on my Blower Engine and just throwing the damned thing in with the 6 speed once and for all. I normally deal only with Adam up in Fontana but if this guy is closer it saves me a lot of distance to run with car in tow or on a "limp in" tune and an engine running Locked VCT and stage 2 blower cams (which I really don't have warm fuzzy about).

 

[sdsubzero4]

RET(Racers Edge Tuning) they're in Downey. Look up their website and the address is on there.

 

[blackstallion06]

Drunk I have heard great things about adam. Do you have diablo or SCT

 

[DrunkFatguy]

Sorry about the delay, I've been in Colorado since the 18th, I have both but like the SCT more than the diablo.

 

[1WKDRSH]

Sorry about the delay, I've been in Colorado since the 18th, I have both but like the SCT more than the diablo.

Where in Colo? I'm from Pueblo. Your lucky I wanted to go home but couldn't.

Sorry for being off topic!!!!!

 

[DrunkFatguy]

I'm sitting my arse here in the springs watching the denver Donkey's getting their Ass kicke, pardon the pun. I'll be back in SD on the 3rd and probably get charged extra for oversized baggage by US Scareways.