lokar center pull e-brake

[CPRstreetmachines]

66 mustang coupe with a versi 9".

Parts list: lokar staineless e-brake cables, lokar chrome handle and clevis.

rear disc brake set up

made a braket out of 1/8" steel and attached to the existing 9" spring perch braket

routing the lines for the ebrake in the stock locations up to the center lever

 

[CPRstreetmachines]

next- is finding the correct mounting point for the lever.

one thing that should be done when installing a center pull e brake lever is to reinforce the floor where you will cutting the hole.

Here we show the plate and where it will be welded to the center trans hump for reinforcement.

this is how the boot cover plate will attach to the newly installed reinforment plate.

 

[CPRstreetmachines]

cut the hole in the floor board and put the reinforcement plate on

plate welded to the floor

pictures of the cables routed in the stock location

rear picture of the cables

completed with clevis

now all you need to do is apply undercoat, install carpet and install boot cover.

check out any of our other projects in our project forums:
http://www.cprstreetmachines.com/forum/index.php?board=2.0

 

[wickedstangs]

wow very nice..