More decal ideas....

[GT400SC]

Here's a couple of cool prototypes.
Anyone have any other ideas?

And of course both of these ideas are completely reversible by simply peeling them off!

 

[dope3]

now thats nice i really like the caps the fuel door is great but i like the caps

 

[wickedstangs]

Very nice GT400SC

 

[IgottaV8]

How about for the SN-95 body style?

 

[EnragedRobot]

Looks great man, especially the caps

 

[eleetryder]

I like the caps, can you make them with the cobra snake?

 

[GT400SC]

I like the caps, can you make them with the cobra snake?

Doubtful, the design is too intricate to be cut as a decal that small. Maybe a simplified version with less detail is possible. Find me a good graphic of the snake (high-resolution) and I'll work on it. Also, it depends on the diameter of the center cap. A larger center allows for a larger design and is easier to make than tiny designs and lots of tiny detail.

 

[eleetryder]

Ok, will try to find.

 

[dope3]

ok whats the price going to be on these

 

[blackstallion06]

I still have my rear cap if you still want it GT400. I would like something for my center cap as well

 

[GT400SC]

Phil, I customized my rear center medallion...along with a few other things.

Tinted rear brake lamps installed. A $6 mod!

 

[eleetryder]

I like the way they turned out!

 

[GT400SC]

ok whats the price going to be on these

Dope3, I can make the wheel centers with anything written on them you want, as long as it fits. Like "Dope3"? I think I'll sell a set of four for $20 because they are two color, silver and black although I can make them in any 2 colors. One color is the base color and the other color is the top layer.

On my center cap decals, they are not silver letters on a black disk. They are a black disk with the letters cut out over a silver disk behind them. This is better because there are no letters to peel off. Tiny letters are fragile and will peel off if you hit them with a pressure washer too hard. Mine are reversed so there is a cutout in the shape of the letters stuck over a colored disk below them. In my case, black on silver. But I could certainly do black on red,black on white, red on white, white on red, and so forth. Four wheel centers for $20. But you have to tell me the EXACT diameter of your wheel centers.

As for the fuel door decal, it is done the same way but with no backing color. The metal fuel door is the backing color. So, you get a round decal with the lettering cut out. $10 and you get a black disk decal with any words on it you want. Again, you must tell me the EXACT diameter you want this to be.

The brake light decals for the 05+ are $10 also with any word on it you want. Tell me the phrase and the color and $10 and it's yours.

The center medallion decal is a two color decal done like the wheels centers. Tell me what you want it to say and it runs for $15.

Again, this can all easily be undone by peeling them off!

 

[yosemiddysam]

Those look really good. Price seems spot on to me as well. Good luck with the sales.

 

[Ichiduo]

can you make center caps which say mach1, in the mach 1 font? could you also make it so the letters are orange, so it matches the orange on my mach? i am TIRED of people telling me:

"nice cobra wheels..."

*shakes head*

 

[GT400SC]

can you make center caps which say mach1, in the mach 1 font? could you also make it so the letters are orange, so it matches the orange on my mach? i am TIRED of people telling me:

"nice cobra wheels..."

*shakes head*

I'm sure it can be done although I'm not sure which font is used for the mach 1. I can dig through my 600+ fonts and see what I have.

Also what is the diameter of the plastic disk insert in the wheel centers?

Orange is not a problem. It's a special color that triples the price!

Just kidding. Let me know if you want me to make thm and I will as soo as I get the diameter of your wheel centers. There's so many sizes, I have to make them to fit. Mine are 2.5"

 

[Ichiduo]

I'm sure it can be done although I'm not sure which font is used for the mach 1. I can dig through my 600+ fonts and see what I have.

Also what is the diameter of the plastic disk insert in the wheel centers?

Orange is not a problem. It's a special color that triples the price!

Just kidding. Let me know if you want me to make thm and I will as soo as I get the diameter of your wheel centers. There's so many sizes, I have to make them to fit. Mine are 2.5"

the center cap / insert for the 99-04 is also roughly 2.5" too. if you cannot find the font, could you use this image as a reference?

thanks and let me know when it's done.

 

[GT400SC]

10-4

Just so you know, the letters would be solid orange with no chrome or metal looking outline. I'll post a graphic of what they would look like when I design it.

 

[Ichiduo]

10-4

Just so you know, the letters would be solid orange with no chrome or metal looking outline. I'll post a graphic of what they would look like when I design it.

solid orange is fine. just tired of hearing people that know nothing about my rims saying "nice cobra rims!" cause of the center caps. :lol:

once you're done, let me know a paypal and my address should be along with the payment.

p.s.

if you still wanna post pics so others will know how they will look, that's cool too. :D

 

[GT400SC]

I don't do PayPal, we'll have to work something else out. No worries.