powertvmark
Well-Known Member
Check out more here
<div>The long awaited oil pump from Peterson Fluid Systems is finally here and we got to see it at the 2009 PRI Tradeshow in Orlando. We talked with Mike Morten of Peterson Fluid System and he explained that the R4 oil pump was the most advanced pump offered from Peterson Fluid Systems<br />
<br />
<img src="http://www.onedirt.com/photos/data/535/IMG_4344.JPG" border="0" alt="" /> <br />
<br />
<b>Watch the PRI video on Peterson's R4 Oil Pump:</b><br />
<embed src="http://www.powertvonline.com/xp2/dmlkZW8uc3Rhbmd0di5jb20/11563/1068/on/" type="application/x-shockwave-flash" width="430" height="343"></embed><br />
<br />
Featuring a four lobe aluminum rotor design that provides excellent flow and "rock steady" pressure, even at very high temperatures. Morten also told us that the R4 Pump "is not only advanced but also is affordable". <br />
<br />
<img src="http://www.onedirt.com/photos/data/535/IMG_4345.JPG" border="0" alt="" /> <br />
<br />
Features of the Peterson Fluid Systems R4 Pump:<ul><li>Lightweight design (stage 6 pump is only 10 pounds).</li>
<li>Modular mount system. Allows for a variety of mounts for the same pump.</li>
<li>Rear Drive available.</li>
<li>4 lobe rotor design.</li>
<li>Made in the USA.</li>
</ul><br />
The R4 pump can be used in virtually any class of racing and with the modular mounts and variety of fittings, the R4 will mount on practically any engine.<br />
<br />
<img src="http://www.onedirt.com/photos/data/535/IMG_4340.JPG" border="0" alt="" /> <br />
<br />
<img src="http://www.onedirt.com/photos/data/535/IMG_4341.JPG" border="0" alt="" /> <br />
<br />
For more information on Peterson Fluid System's R4 pump, visit their website at <a href="http://www.petersonfluidsys.com/" target="_blank">www.petersonfluidsys.com</a></div>
<div>The long awaited oil pump from Peterson Fluid Systems is finally here and we got to see it at the 2009 PRI Tradeshow in Orlando. We talked with Mike Morten of Peterson Fluid System and he explained that the R4 oil pump was the most advanced pump offered from Peterson Fluid Systems<br />
<br />
<img src="http://www.onedirt.com/photos/data/535/IMG_4344.JPG" border="0" alt="" /> <br />
<br />
<b>Watch the PRI video on Peterson's R4 Oil Pump:</b><br />
<embed src="http://www.powertvonline.com/xp2/dmlkZW8uc3Rhbmd0di5jb20/11563/1068/on/" type="application/x-shockwave-flash" width="430" height="343"></embed><br />
<br />
Featuring a four lobe aluminum rotor design that provides excellent flow and "rock steady" pressure, even at very high temperatures. Morten also told us that the R4 Pump "is not only advanced but also is affordable". <br />
<br />
<img src="http://www.onedirt.com/photos/data/535/IMG_4345.JPG" border="0" alt="" /> <br />
<br />
Features of the Peterson Fluid Systems R4 Pump:<ul><li>Lightweight design (stage 6 pump is only 10 pounds).</li>
<li>Modular mount system. Allows for a variety of mounts for the same pump.</li>
<li>Rear Drive available.</li>
<li>4 lobe rotor design.</li>
<li>Made in the USA.</li>
</ul><br />
The R4 pump can be used in virtually any class of racing and with the modular mounts and variety of fittings, the R4 will mount on practically any engine.<br />
<br />
<img src="http://www.onedirt.com/photos/data/535/IMG_4340.JPG" border="0" alt="" /> <br />
<br />
<img src="http://www.onedirt.com/photos/data/535/IMG_4341.JPG" border="0" alt="" /> <br />
<br />
For more information on Peterson Fluid System's R4 pump, visit their website at <a href="http://www.petersonfluidsys.com/" target="_blank">www.petersonfluidsys.com</a></div>
