-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Shock tower struts?
- Thread starter Gawthle
- Start date
Windveil Blues
OLD FART
I'm not sure what you mean... are you talking about strut tower braces?
Jim
Jim
Gawthle said:
ya, sorry
i've seen them in the engine bay as well as in the back (for the fastbacks)
Windveil Blues
OLD FART
Oh, man... no worries...
Take a look at the pic below. It'll tell ya what you wanna know. I do not have the rear shock tower brace in my '06 because I have an aftermarket panhard bar brace and panhard bar. These pieces keep the lateral (side to side) movement to a dull roar when I am cornering or under hard acceleration... like snapping the clutch at 4 grand, shifting like a maniac or stuff like that.
Check out StangSuspension.com or talk to Emilio for panhard bar brace and panhard bars... either will definitely hook you up.
Jim
Take a look at the pic below. It'll tell ya what you wanna know. I do not have the rear shock tower brace in my '06 because I have an aftermarket panhard bar brace and panhard bar. These pieces keep the lateral (side to side) movement to a dull roar when I am cornering or under hard acceleration... like snapping the clutch at 4 grand, shifting like a maniac or stuff like that.Check out StangSuspension.com or talk to Emilio for panhard bar brace and panhard bars... either will definitely hook you up.
Jim
Gawthle said:
Windveil Blues
OLD FART
Cool! Keep me posted on the build.
Jim
Jim
Gawthle said:
beejay31000
BULLWINKLE
turbo....sweet man.
Foxman
Well-Known Member
no more then 8 lbs of boost unless you want to split your block....
i had to remove my STRUT tower brace to fit my JLT TRU cold air intake but did recently order a STEEDA rear shock tower brace. it has to be welded in onyl draw back but decision im fine with