Some MAJOR cleaning today!

[atlblue98gt]

Looking good ATL. Now you mind as well take out all of the rear seat belts, nut & bolts and get a rear seat delete kit to off set the 80lbs you just added. Don't think you'll be needing that stuff now.

Im actually gonna look into that. The guy I bought this from is gonna give me his old panels so i can use them to measure and cut mine clean. May end up cutting the bar so i can have a clean cut a circle in the panel then welding it back together under the panel so you cant see it. Idk how they did this

 

[orange395w]

That kit comes with a piece of pvc piping. Before the rearward bars get welded to the main hoop you slide the pvc pipe on the main hoop and mark where it touches the body panel. Then you cut the hole. When it's already welded you are kinda screwed.

 

[atlblue98gt]

i didnt buy it new, but i can cut it close to the plate, feed it through then weld it back in place. How hard you think that'll be. Or should i take in to an interior place and let them cut up the panel and fit it back on there. They might have plastic filling or something. I just want it to look clean

 

[orange395w]

If you are going to cut the roll bar, you will want to make it slip fit. Trying to weld 2 pieces of metal together that are the same size will be difficult and weak. I would get a piece of the same thickness steel tubing that will slip fit over the original pipe. Easier to weld and alot stronger. Just a thought.

I would try to get the guys body panels and try to get the location of the holes off of his first. I would only cut the roll-bar as a last resort.

 

[atlblue98gt]

got some more pics

without the side bars

 

[atlblue98gt]

 

[orange395w]

Wow you're still running quad shocks!?? Take them things off man. Roll-bar looks good. Car is taking on a whole new attitude with the rims and the roll-bar.

 

[dope3]

looks good keep the pics coming

 

[atlblue98gt]

Wow you're still running quad shocks!?? Take them things off man. Roll-bar looks good. Car is taking on a whole new attitude with the rims and the roll-bar.

will taking those out help me launching? DO I need to take them out just for the track, or leave them out. Will they not help me on the street......I told you I'm totally STOCK suspension. LMAO

Ill upload more pics today. Got the back seats in. Still gotta use it as a daily driver till I get another car.

 

[mustangtim]

car is really looking good looks more like a drag car

 

[sandiego5.0]

Booo gamecocks!! Go Clemson!!

 

[atlblue98gt]

Booo gamecocks!! Go Clemson!!

look at thier record
gamecocks 5-1 and ranked 22
clemson 2-3 rancked prolly close to the bottom :rofl:


.......


But back on topic.
pics with seats in.

not my panels.I wouldnt cut mine up that bad. I wanna find someone to do the install and piece my panels around it.

 

[Lordgufi]

ewww those cuts are hideous aside from that looks great =)

 

[atlblue98gt]

ewww those cuts are hideous aside from that looks great =)

Those arent my panels. Just borrow those till i get mine done professionally. I just wanted my seats back in. As you can tell, those dont match my interior.

 

[Lordgufi]

ah i see

 

[fastsleeper]

6pt Roll-bar would be my guess. Why do you have a big hole under the back seats?

That's where the maid lives.