• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

This just in: BlackCobraGirl joins our Forums...

BlackCobraGirl

BlackCobraGirl

Well-Known Member
Shane361 said:
Impressive..work on your own cars? How did you get into Mustangs?
Click to expand...

i do work on my own cars but i didnt do any of the work on this cobra....most of it came with it when I bought it...i just dont do brakes and electrical stuff LOL....seen too many things go wrong. Well mustangs have been my favorite since i was little...my first mustang was when i was 18....the cobra is my third. :)
 
Tommy

Tommy

New Member
As I was leaving, I saw that car and stopped to stare at it! Looks sharp, and from what I see above.. woo-hoo!


Nice ride :thrasher:
 
Shane361

Shane361

Well-Known Member
Sorry for the 20 questions. I'm on watch till 0200 and very very board. I do brakes for alot of people so if ya need that help just ask. I'm on my 3rd and 4th Mustang at the momenr. Bought a comp orange 04 Cobra a few years back which has about 600hp and the daily is an 04 DSG mach1. Love my hunnies as we all do.
 
BlackCobraGirl

BlackCobraGirl

Well-Known Member
Shane361 said:
Sorry for the 20 questions. I'm on watch till 0200 and very very board. I do brakes for alot of people so if ya need that help just ask. I'm on my 3rd and 4th Mustang at the momenr. Bought a comp orange 04 Cobra a few years back which has about 600hp and the daily is an 04 DSG mach1. Love my hunnies as we all do.
Click to expand...

very nice! cant wait to see them! well i do need help with brakes actually lol....i need new brakes and my rotors turned...do you have the machine for that or any hook ups on that?
 
I

Ichiduo

Guest
welcome to the club... if you must meet everyone, you'll have to head out to the central valley, then the carolinas. ROAD TRIP!
 
Shane361

Shane361

Well-Known Member
Honestly I would take this time to upgrade the rotors to cross drilled or slotted or both. Big controversy on some sites about turning rotors and them still being within the rite tolerence. But I believe the hobby shop can also do that and would be happy to do the work. We work on each others cars alot in this club..lol.
 
I

Ichiduo

Guest
BlackCobraGirl said:
big cruise lets go! lol
Click to expand...

being that you're new, i'll let you know to NEVER call my bluff... unless you really want to go on a road trip to the carolinas... :laugh:

people thought i was kidding when i said i'd get my mach. long story short, you see the car i have right now. :)
 
BlackCobraGirl

BlackCobraGirl

Well-Known Member
Ichiduo said:
being that you're new, i'll let you know to NEVER call my bluff... unless you really want to go on a road trip to the carolinas... :laugh:

people thought i was kidding when i said i'd get my mach. long story short, you see the car i have right now. :)
Click to expand...

lol good to know but i still love road trips!
 
BlackCobraGirl

BlackCobraGirl

Well-Known Member
Shane361 said:
Honestly I would take this time to upgrade the rotors to cross drilled or slotted or both. Big controversy on some sites about turning rotors and them still being within the rite tolerence. But I believe the hobby shop can also do that and would be happy to do the work. We work on each others cars alot in this club..lol.
Click to expand...

yeah im trying to go the cheaper way right now on them lol dont have alot of money to spend right now on rotors
 
Shane361

Shane361

Well-Known Member
Do they need to be turned? Stock oem ones will run about 30 each and I paid about 250 for a set of four cross drill and slotted. Pretty sure we can get them turned at the auto hobby shop though.
 
M

maverick169v

WS Posting God
if your gonna do it do it right. cause if you go cheap now your still gonna go expensive later. they arent that much and are worth just doing in my opinion
 
BlackCobraGirl

BlackCobraGirl

Well-Known Member
Shane361 said:
If it's BAD, they may be beyong turning. As in grooves and what not that are deep. Would know more by looking but I would be ready to purchase a new set. -Shane
Click to expand...

yeah Ill probably go for a new set now that I think about it..how did you get yours for so cheap?

maverick169v said:
if your gonna do it do it right. cause if you go cheap now your still gonna go expensive later. they arent that much and are worth just doing in my opinion
Click to expand...

yeah thanks I really didnt think about that til now....

PapaTom said:
If you need a set of stock front rotors, I have a pair which have only been turned once. $50
Click to expand...


thank ill let you know! :)
 
You must log in or register to reply here.
Top