• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Updates on my car

sdsubzero4

Spring Valley, CA
Here's a little update on my car. The install has begun on the supercharger and the torque converter. Checked on my gears and found that some bolts has gotten loose and did quite good damage to the locker and gear. A big chunk of the locker and few of the teeth on the ring gear were gone. It was a good thing, could have locked up on me while driving. It was good timing. Also discover my water pump has gone bad and was leaking badly. So all that is going to be replaced.

106_3332.jpg


106_3331.jpg


106_3316.jpg


106_3318.jpg


106_3319.jpg


106_3320.jpg
 

orange395w

OG MEMBER
Staff member
Good they are making progress and glad they found the problems. Sounds like something didn't get torqued when the gears were done. What was loose the carrier bearing cap bolts?

So what gear ratio and differential are you gonna go with now?
 

ears

Well-Known Member
man that blows,,,,, good thing it didnt lock up on ya,,,, that could have been a bad day!
 

sdsubzero4

Spring Valley, CA
Good they are making progress and glad they found the problems. Sounds like something didn't get torqued when the gears were done. What was loose the carrier bearing cap bolts?

So what gear ratio and differential are you gonna go with now?

staying with FRPP, 4.30. Yep, the bearing cap bolts.
 

yosemiddysam

Well-Known Member
Donator
LMAO......Sorry for the carnage Sub. Looks like it is going allong though. I would blame Emilio even if it wasnt him!!!!!!!
 

ears

Well-Known Member
yea e is easy to blame,,,,,, we'll just say it was him....... makes things easier that way.... and you can clear your conscience about it!! lolololololololol!!
 

02gt

Well-Known Member
what are you going to do about the Diff? built unit with beefy axles sounds like a good idea
Kenne bell TQ+4.30's+3500 stall= snapped axles(with good tires)
 

sdtraviesosd

Well-Known Member
I have an 04 GT water pump you can buy off of me :D
I can't really tell what year your car is, but It wont work with your Under drive pullies if your car has the old style water pump.
 

sdsubzero4

Spring Valley, CA
I have an 04 GT water pump you can buy off of me :D
I can't really tell what year your car is, but It wont work with your Under drive pullies if your car has the old style water pump.

I have an 02, but I got the water pump taken care of. Thanks.


Update: The gear and locker, torque converter are in. Will be putting in the supercharger and intercooler next. Projected completion is Friday. There is a blog on this project on Renegade's website.

I would also like to thank Bruce at JBA for putting in a tune on my tuner so I can get my car started with the new injectors and MAF, and of course, the S/C, so it won't flood my engine. After completion, will be going down to JBA for a custom tune and dyno to see where she is.
 
Top