• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Wanna turn off that anoying belt minder on your stang

Foxman

Well-Known Member
Wanna turn off that anoying belt minder in fords?

The first method, temporary deactivation, or one time disable: After you have started your vehicle, buckle and then un-buckle your safety belt. Be sure to buckle back up.... This will disable the Belt Minder only for that ignition cycle.

The second method, permanent deactivation: There are 9 steps you need to follow to deactivate or activate your Belt Minder system. Before doing so, make sure that:

* The parking brake is set.
* The truck/car is in Park (automatic), Neutral (manual).
* The ignition is OFF.
* All doors are closed.
* The driver's safety belt is un-buckled.
* The parking and headlights are OFF.

Then follow these 9 steps:

1. Turn the ignition switch to ON, but DO NOT START.
2. Wait for the safety belt warning light to go OFF(1-2 minutes).

Steps 3-5 MUST be completed within 60 seconds!

3. Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.
4. Turn on the headlights, turn off the headlights.
5. Buckle, then un-buckle the driver's safety belt 3 times, ending with the belt un-buckled.

After step 5, the Safety Belt Warning Light will be turned on for 3 seconds.

6. Within 7 seconds of the safety belt warning light turning OFF, buckle then un-buckle the safety belt.

This will disable the Belt Minder if it is currently enabled, or enable the Belt Minder if it is currently disabled.

7. Confirmation of the disabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds.
8. Confirmation of the enabling of the Belt Minder is provided by flashing the safety belt warning light 4 times per seconds for 3 seconds, followed by 3 seconds with the safety belt light off, then followed by flashing the safety belt light 4 times per second for 3 seconds again.
9. After confirmation, the deactivation/activation of the Belt Minder procedure is complete.
 

Foxman

Well-Known Member
sounds like a lot to do but its not hard at all..

I did it to my dads 07, my mach 1, and my 2001 explorer!
 

95BEASTstang

Well-Known Member
Mine worked on my 95 GT ,I'm going to try it on my wifes 06 GT tonight.That's so cool ,I always hated that annoying ding.....Now it's gone ......Thanks Machman
 

Windveil Blues

OLD FART
Let me know if it works on the '06, will ya?

Thanks,

Jim
95BEASTstang said:
Mine worked on my 95 GT ,I'm going to try it on my wifes 06 GT tonight.That's so cool ,I always hated that annoying ding.....Now it's gone ......Thanks Machman
 

blackstallion06

Everrett Wa. Soon to be St. Louis MO.
Donator
LOL Now they are all going to say thanks alot Andy I got a ticket the other day for no seat belt LOL
 

Roushed2

302 Motorsports
hey mach i will post a pic a couple pics of my ls for you. also go check out lincolnvscadillac.com for your ls my name on there is wicked_ls
 

Foxman

Well-Known Member
I couldnt put my LS pic with that there for some reason... I will mess with it later


and yea i found that lincolnvscadillac forum when i was shopping for the LS great place.... I'm Lincoln00 I have the avatar that i have on here in my sig on LScad.
 
Top