• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Wicked Stangs Race Car (1988 LX)

W

wickedstangs

Guest
Alright Everyone

Thanks to all that contributed to our very own race car. The reality has happened. We are the pround owners of a 1988 LX Hatchback.

Before we get to the fun part, I would like to give special thanks to EVERYONE who has helped. Also a special thanks to MUSTANGCWO who deserves a big Thank You. Fairly new to the club he has really helped to make this a reality. Thank You CWO

Here is a list of all contributors:
1 dope3 $20
2 Mustangcwo $100
3 VP_96COBRA $20
4 Mustangcwo $20
5 wickedstangs $10
6 wickedstangs $50
7 Mustangcwo $20
8 beejay31000 $20
9 EnragedRobot $100
10 VP_96COBRA $50
11 Mustangcwo $20
12 mulethras $50
13 frank s $20
14 mcbullitt $20
15 1WKDRSH $20
16 wickedstangs $50
17 wikedcobra312 $10
18 Roushed2 $20
19 beejay31000 $20
20 WSPS $100
21 VP_96COBRA $20
22 wickedstangs $50
23 Mustangcwo $50
24 wickedstangs $500
25 Mustangcwo $300

TOTAL RAISED $1660
MINUS PAYPAL's 2.9% + $0.30 USD FOR EVERY TRANSACTION:nonono:

WS RACE CAR
Its a 1988 LX Hatchback and been sitting for a long time:( and needs our loving care... I went today to look at it and it has the potential. It was going to be set up as an all drag car but, the owner ran out of money for it. There is tons of parts on this car :D I will list some at the end. Lets keep are fingers crossed and see what comes of it.

After inspecting the car these are things I noticed.
1. Tubular "K" Member
2. Tubular A-Arms
3. Aeromotive A1000 Back Half Fuel System Kit
4. UPR upper control arms
5. Drag Racing Rear Control arms
6. 90/10 Struts front
7. 50/50 in the rear
8. Brand New Slicks mounted on Rims
9. Car been converted to 5 lugs.
10. Set of Chrome Steeda wheels. (Need Polishing Bad)
11. All the wire have been relocated to the Firewall, and behind the Dash has been cleaned not heater core and only the necessities.
12. There is a Tweecer Chip on the car ready to connect to a laptop.
13. 8pt Roll Cage welded in professinally.
14. Aluminum Drive Shaft
15. Brand New Rear End Gears.
16. Subframe connectors
17. Firewall adjuster

ATT00088.jpg

ATT00094.jpg

ATT00091.jpg

ATT00100.jpg


MORE PICS
 

dope3

Well-Known Member
thats cool looks good i wish i was close so i could help work on it keep us posted on the progress
 
M

Mustangcwo

Guest
Great job Wicked. I thought it would take forever to get a platform that would be easily adapted to the drag strip. Now we just need to come together and get the car ready to RUN!!!!
 
W

wickedstangs

Guest
yep trying to get the car quick so I can began to assess the situation at hand:)
 

Gibs

Well-Known Member
Staff member
Global Moderator
What does the first post say???

Hope about under the red bar on the front page?

YES!!!!!!!!!!!!!!

Just need to pick it up.


Gib
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
a chevy motor jk we can start stripping it down and cleaning it inside and out. where is it going to be kept?
 

IgottaV8

Wickedstangs Road Racing Team
Staff member
Moderator
Board Member
let's get a 427 crate engine and stuff it in there!!!
 
Top