Work tools

[Gibs]

not true. if it is ugly it is more than likely contaminated, i.e. atmosphere penetrated the weld and caused porosity and slag being trapped inside the weld under the surface. :hello:

Well then I will stand corrected. That is what I have always heard and have even read it somewhere. But you are the expert.

DSG you should be able to easily do this piece right.


Gib

 

[DSGimportslayer]

yeah i could make it if my mig machine was up and running that is the only set back....and material

 

[fastsleeper]

yeah i could make it if my mig machine was up and running that is the only set back....and material

Thanks DSG. Will it be up and running? What material do I need to get?

 

[fastsleeper]

not true. if it is ugly it is more than likely contaminated, i.e. atmosphere penetrated the weld and caused porosity and slag being trapped inside the weld under the surface. :hello:

eeeeeeuuuuu

Sounds like closin' time at a bar.:rofl:

 

[fastsleeper]

If I had the metal I could make it. I do however know someone who could make it. But I would have to get with him on monday.

Thank You Yose. I will appreciate your efforts and geeve you leetle preset.
:lol:

 

[fastsleeper]

Post up a pic of it. I may be able to make one.

HEy HEY there WKDR. Can you do it?

 

[DSGimportslayer]

40" of 3/4" mild steel pipe. if anyone knows anyone with a tig machine i can tig it and in that case you could get stainless tubing.

 

[fastsleeper]

If I had the metal I could make it. I do however know someone who could make it. But I would have to get with him on monday.

Hey Yose!

I have a huge migraine so i did not read your post correctly. I'll buy the metal if you tell me what to buy and where to get it. No problem there.

 

[fastsleeper]

40" of 3/4" mild steel pipe. if anyone knows anyone with a tig machine i can tig it and in that case you could get stainless tubing.

Just let me know. And thanks for your help, DSG.

 

[yosemiddysam]

I think I have one made for you that might work. I sent ya pics to your phone. Let me know if it will work.