-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
WS Business Cards
- Thread starter HisPony
- Start date
HisPony
Wondering where I am!?!?
I don't need anything fancy, just something to hand out also
How would a laser jet printer with photo paper work?
I think alot better and cleaner looking..
Or is it an Ink Jet???? I don't know, but unfortunately I am out of photo paper, and it isn't cheap...
I am going through Mustang withdrawals. There is one Stang on this base and it is hideous.....
sdsubzero4
Spring Valley, CA
Mine is an inkjet printer. WS, you see my new cards, they don't run and its good quality. The ones I gave you, you put it in the washer, so, yeah, the ink will run after that. :D
And I no longer have the Business Card program since my laptop had to be reloaded. My harddrive had to be rebooted. The program I got was from 1WKDRSH so, Sorry, I cannot make the cards anymore until I get the program again.
And I no longer have the Business Card program since my laptop had to be reloaded. My harddrive had to be rebooted. The program I got was from 1WKDRSH so, Sorry, I cannot make the cards anymore until I get the program again.
spdpilot
Well-Known Member
Well it doesn't really need to be a big expense.... I am willing to buy some. I just need to get some art work. This is the place I have used before with my own business....
http://www.vistaprint.com/business-...sCardsBusiness+Identity&dng=Business+Identity
Bet it is cheaper then even printing them on an Ink Jet.
http://www.vistaprint.com/business-...sCardsBusiness+Identity&dng=Business+Identity
Bet it is cheaper then even printing them on an Ink Jet.
sdsubzero4
Spring Valley, CA
Spd, here's a couple of cards sample:
Front:
Back:
Front:
Back:
Front:
Back:
Front:
Back:
HisPony
Wondering where I am!?!?
Spd, here's a couple of cards sample:
Front:
Back:
I would be willing to pay for a 100 of these
spdpilot
Well-Known Member
This is what they say the artwork size should be:
Document Trim Size
Horizontal Vertical
3.43" x 1.93"
87mm x 49mm
1028 x 579 pixels 1.93" x 3.43"
49mm x 87mm
579 x 1028 pixels
Full Bleed Size
Horizontal Vertical
3.54" x 2.05"
90mm x 52mm
1062 x 615 pixels 2.05" x 3.54"
52mm x 90mm
615 x 1062 pixels
Finished artwork should use the full bleed dimensions for best results.
Document Trim Size
Horizontal Vertical
3.43" x 1.93"
87mm x 49mm
1028 x 579 pixels 1.93" x 3.43"
49mm x 87mm
579 x 1028 pixels
Full Bleed Size
Horizontal Vertical
3.54" x 2.05"
90mm x 52mm
1062 x 615 pixels 2.05" x 3.54"
52mm x 90mm
615 x 1062 pixels
Finished artwork should use the full bleed dimensions for best results.
sdsubzero4
Spring Valley, CA
His: check out the website Spd posted. They might be able to use the sample and its $15 something for 250 matted.
HisPony
Wondering where I am!?!?
I am going to see what the company my work uses charges for cards
sdsubzero4
Spring Valley, CA
Yeah, sorry couldn't help you out. My laptop crashed right after you left for Connecticut and my hard drive had to be rebooted and lost all programs from my hard drive. I forgot to download those programs onto my external like I did with my pictures.
HisPony
Wondering where I am!?!?
spdpilot
Well-Known Member
I like your artwork.... Do you have it in a full bleed size?
1062 pixels X 615 pixels?
I really like the Gold Version. But the text is really close to the edge and it will be cut down. So we need to move the text away from the edges. If we don't use the full blees size, because it is black, it will have white edges.
I was going to order 250 on 80 pound Flat Matte finish. I would assume the delivered price to be under $20-25. I will take like 75 of them and donate the rest to the club for anyone else who wants to use them.
1062 pixels X 615 pixels?
I really like the Gold Version. But the text is really close to the edge and it will be cut down. So we need to move the text away from the edges. If we don't use the full blees size, because it is black, it will have white edges.
I was going to order 250 on 80 pound Flat Matte finish. I would assume the delivered price to be under $20-25. I will take like 75 of them and donate the rest to the club for anyone else who wants to use them.
spdpilot
Well-Known Member
I can also come up with my own version. I work with photos all the time. If you don't have it, I can work with what was posted.
Thanks,
Glen
Thanks,
Glen
sdsubzero4
Spring Valley, CA
Spd-
This is what I got from Emilio. I don't have the original, Emilio may have it. But if you come up with your own design, that will work too. Most here that have cards have their own design. These are just the generics.
Thanks for your offer.
This is what I got from Emilio. I don't have the original, Emilio may have it. But if you come up with your own design, that will work too. Most here that have cards have their own design. These are just the generics.
Thanks for your offer.
spdpilot
Well-Known Member
Of course.... you know if I come up with my own design it is going to have my Red GT500 on it:lol:
I will go that route....but if you guys don't mind my car on it...then I will still give some of them to the club so others have some.:hello:
I will go that route....but if you guys don't mind my car on it...then I will still give some of them to the club so others have some.:hello:
not a problem....