• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

WTT: 96 NMRA built roller w/ 04 cobra motor, xtra

h-townterror

Well-Known Member
basically i lost interest in finishing this car up,had the roller for sale without the motor ect a few months ago, have the motor for sale in seperate adds, ect.. but this time i just want to sell it or trade it as a whole package deal.. the car is well kept, never sees rain ,always garaged since purchase a few years ago.. the cobra still stands in stock formation, never backhalf or mini tubbed..no rust,and never been in no accidents,car fax clean. Interior is still intact besides the corbearu seats,roll cage and rear seat delete.Like i stated i lost full interest in finishing the car up,,its 97% done,all it needs is the trans and finishing the wiring up(modify the 96 ecu to the 04 engine harness).. motor is inside the engine bay as well -)... im basically looking a complete 03/04 cobra or whatever is up to offer.. i have a little over 10k in this car excluding the motor.. .. i can work something out as well,,just PM or let me know,thank you all!
PLEASE REACH ME AT noel.soto@kbr.com
car is certified to 8.50 et. =)
1996 Cobra #657
Black exterior/Tan interior
5% window tint

Motor:
2004 cobra supercharged motor
22k miles on the motor
ported/ploised eaton, stage 4,performed by strictly racing
bbk long tube headers,new,ceramic coated
steeda timing adjuster
60lb injectors

Xtra parts: JW SFI c4 to mod bellhousing
FRPP aluminum drive shaft
autometer gaugesm boost,oil temp, oil pressure,Boost,A/F ration gauge


Fuel system:
Aeromotive A1000 fuel pump NEW
Aeromotive 100 micron filter NEW
Aeromotive fuel pressure regulator NEW
Aeromotive Y block NEW
Aeromotive 99-01 cobra fuel rails NEW
10 gallon aluminum fuel cell NEW
Aeroquip stainless braided fuel line -10 (15ft) NEW
Aeroquip stainless braided fuel line -8 (20ft) NEW
MSD DIS4 ignition NEW
MSD coil pack adapters NEW
MSD 4.6 DOHC plug wires NEW
Ron Davis custom 3 row aluminum radiator
sn95 electric fan

Rearend:
8.8 with tig welded axle tubes (done in jig)
Moser 33 spline axles NEW
Moser 33 spline spool NEW
Moser C-clip eliminators NEW
Ford Racing 4.56 gears NEW
Ford Racing Rear cover/girdle NEW

Steering/Suspension:
UPR Pro-Series front tubular suspension
UPR bump steer kit NEW
UPR/QA1 14" 150# front coilovers NEW
UPR Pro-Series rear suspension w/upgraded hiems NEW
Steeda caster/camber plates NEW
Strange 10 way adj struts and shocks NEW
Welded torque boxes
Fox body rear springs
Flaming River manual rack (Sn95) NEW
Flaming River steering shaft (Sn95) NEW
Aerospace manual brake conversion (Sn95) NEW
TCI line lock/roll control NEW
Summit proportioning valve NEW
UPR quick release quadrent, firewall adjuster, adjustable cable NEW

Chassis:
Wolfe 10 point Chromemoly cage (painted black gloss)
2"x2" through floor frame connectors with kickouts
Stroud window net NEW
Simpson 5 point harness BLACK (2) NEW
Corbeau Forza seats (black)
UPR air bag deletes (painted with saddle dye) NEW
Skinny Kid aluminum rear wing NEW
Weld ProStars 15x3
Moroso D2 26x4.5-15 NEW
Weld ProStars 15x10 (6.5 bs)
M/T 28x12.5 ET Streets
M/T tubes NEW
Taylor aluminum battery box NEW
Flaming River on/off switch NEW
Flaming River switch rod (for on/off through bumper) NEW
Russell stainless braided brake hoses NEW
All new hard brake lines
Repainted engine compartment and inner wheel wells

DSC020365B15D.jpg

DSC020315B15D.jpg

DSC020305B15D.jpg

DSC020295B15D.jpg

DSC020165B15D.jpg

DSC020155B15D.jpg

DSC02013.jpg


DSC020425B15D.jpg

http://i77.photobucket.com/albums/j79/jusa6/cobra20pics20011-1.jpg[/IMG
[IMG]http://i77.photobucket.com/albums/j79/jusa6/untitled3-1.jpg

21A_00006myspace.jpg


let me know whatcha have for trade,, can sell outrite for 17k.. but preffer trades
 
Top