[SOLVED] Very IMPORTANT 4V SWAP (Electrical)

[wickedstangs]

have you found the info on what color wires from 5.0 harness to connect to the 4.6 harness?

If i'm not mistaken it only takes 2 wires from the 4.6 ecm harness to make the DOHC run. Power wire to the computer and a ground wire that you tie into from the factory 5.0 harness. Run the fuel pump off of its on relay (like ignition relay). This will ge it running. I think you can run a power from the drivers side 5.0 harness to the 5.0 starter solenoid and to the starter. I could be wrong? Brett chime in here and correct me!!

C110 - connector 110 8 terminal Color of connector:
brown (left fender apron)
Tan/ Yellow - goes to tach
Red/ White - goes to the temp gauge
White/ Red - goes to oil pressure

This is on a 93' car, still looking for the paper I have the different years on..

 

[GT400SC]

Why is it that his car looks like it has a lot more room in it?