**** i might be selling and parting my car out depending on what happens over the next 24-48 hours
-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
beejay31000
BULLWINKLE
why dont we do this on a weekend?? i would love to help out, but on weeknights i cant make it.
xavier296
Well-Known Member
I am sure there will be plenty of work left to do this weekend!! Maybe the install can be during the weekend!
I will bring a compressor, air tools, grinder, and other misc, I just don't own a sawzall. We will figure something out to get the top off. Ofcourse, my friend recommended we skip the trailer and just drive it to VPs after cutting the top off!! Cops would love us.
I will bring a compressor, air tools, grinder, and other misc, I just don't own a sawzall. We will figure something out to get the top off. Ofcourse, my friend recommended we skip the trailer and just drive it to VPs after cutting the top off!! Cops would love us.
90stripes
Well-Known Member
Gibs07GTcpe said:
i am also. emilio convinced me on it to be there just untill we get the other motor built, but i if we have to start cutting firewalls and finder wells then i think its going to be a mistake. and as far as high horse power goes we have to go back to the fundamentals. no replacement for displacement.
M
Mustangcwo
Guest
I have a sawzall...no worries. I'll bring it when we're ready to start ripping it apart.
I say custom mount all the electronics so they dont need to cut anything if we are going to pushrod power anyway.....
Gib
Gib
cops are all over the 125 i def odnt recommend it
W
wickedstangs
Guest
just to clear it up for some of you guys all the cutting tools are for the Donor Car not the Race Car.. Everything is going to fit... (fingers crossed) 
Lets have fun and do it as a club.. This is going to be temp unless is all work awesome than we will build a bad ass buillet proof 4.6
Lets have fun and do it as a club.. This is going to be temp unless is all work awesome than we will build a bad ass buillet proof 4.6
HisPony
Wondering where I am!?!?
I have heard nothing but good things on various boards about these guys for wiring harness':
http://www.painlessperformance.com/
Ask for a discount to run some of thier stickers on the car? Never hurts to ask!
http://www.painlessperformance.com/
Ask for a discount to run some of thier stickers on the car? Never hurts to ask!
HisPony
Wondering where I am!?!?
If your looking for a donor car or engine, don't forget about all of the junkyards off of 905 at Brown Field. I have found many good things and they have the "hotline system out there.
02gt
Well-Known Member
This might be a difficult project but it will be worth the effort when it's all said and done. There aren't many of these modular foxes out there so if we put some effort in to the car we can really have a head turner on our hands.
tons of cars in the junk yard