Thanks for your help today guys. The car will surely be fired up this coming weekend. Can't wait!
-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Big Thanks to Eric (02gt) & Pha
- Thread starter orange395w
- Start date
MMMMMMMM MMMMMMMMMM Goood!!!!!!!! Just like mamma made them!
Wow that is awesome!
Gib
Wow that is awesome!
Gib
sdsubzero4
Spring Valley, CA
Not much more to say.......DAMN! That is looking AWESOME!!!!!!!
Thanks guys. All that's left is:
1. Wire up Water pump
2. Install TB and Powerpipe
3. Install Radiator
4. Install water neck & thermostat
5. Bolt up H-pipe & dumps
6. Add water/anti-freeze
7. Connect all vacuum lines, pcv etc.
8. Turn the key and pray everything is good!
1. Wire up Water pump
2. Install TB and Powerpipe
3. Install Radiator
4. Install water neck & thermostat
5. Bolt up H-pipe & dumps
6. Add water/anti-freeze
7. Connect all vacuum lines, pcv etc.
8. Turn the key and pray everything is good!
02gt
Well-Known Member
Hey thanks for calling me up and for dinner, call me up when your gonna get her running...
Do you have live chickens, a bible, a knife, and a rosary on standby?
Let me know as I have a set of that left over from the framerail removal. I will need them back shortly though....LOL
Let me know as I have a set of that left over from the framerail removal. I will need them back shortly though....LOL
No, but I suppose I should. Never had a solid roller before I think I'm gonna be scared when it fires up.
solid roller???
is that a roller block using flat tappet lifters? Or am I backwards?
is that a roller block using flat tappet lifters? Or am I backwards?
It is not a roller block, but the lifters are solid rollers and the cam is ground from Billet steel, so there will be no flexing like standard ductile iron cams. The lifters are solid, but have rollers on them just like hydraulic rollers.
Tommy
New Member
I didn't know you had an install party! I would've dropped by, even to hand the drinks. Was BORED out of my mind today. Did the yard work and just sat and watched TV.
It was last minute. I decided to drop the engine in so I called Eric to lend a hand. By the time he got there the engine was already in, but I needed help lining things up. Pha and Eric were a great help, but I was a little stressed. I'm not used to other people wrenching on my car, lol!
Tommy
New Member
I know what you mean! I've been the only one working on the '79! I had my son learn on a few things but I triple checked his work lol!
GT400SC
PM for Decals
Hey, uncover that windshield banner, bitch!
02gt
Well-Known Member
Lol
sdsubzero4
Spring Valley, CA
Hahahahaha!!!!!
That looks awesome Bobby!!!!! I had to wait to get home to see them.
thats what I am talking about team work.. Team WickedStangs... good job and looks real good.
Red
Well-Known Member
Now that's a COOL looking motor. Grats orange
In due time young padowan. In the mean time........STFU!
Problem with you is your the "team" and everyone else is the "work"!