• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Install Cobra Bumper Insert 87-93 Mustang

Mustangcwo

Crew Chief
Staff member
Board Member
Due to the high temps the car is running, I decided to open the front end and allow more cooling over the top of the engine.

Here are some pictures before I started:
photo4.JPGphoto5.JPG
 

Mustangcwo

Crew Chief
Staff member
Board Member
photo.JPGphoto3.JPG Next, I downloaded this template, cut out the pieces and then taped them to the car. Once I had the paper in position, I took a sharpie to the front bumber and traced out the cutting lines.
View attachment 3946View attachment 3947
 

Attachments

  • Cobra Insert Template.pdf
    33.2 KB · Views: 105

Mustangcwo

Crew Chief
Staff member
Board Member
Punched a hole in each corner with a drill to provide access for the jigsaw. First I covered the jigsaw plate to prevent scraping, then I just removed the entire plate to make it easier in tight spaces. Then I add some Loctite double-stick tape to the bottom and sides.photo2.JPGphoto6.JPGphoto7.JPG
 

SiK FoX

Well-Known Member
I've always wanted this mod but i didn't wanna risk messing up my bumper...Looks way easier than i thought.
 

Mustangcwo

Crew Chief
Staff member
Board Member
Paint completed...Ready for Mustangs by the Bay!!!! The sun was messing with the camera and causing glare. The paint job is AWESOME!!


photo14.JPG
 
Top