• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

more performance

blackstallion06

blackstallion06

Everrett Wa. Soon to be St. Louis MO.
Donator
Tommorow bro... I swear I think it maybe around 320RWHP. If I can get these numbers with the bottle I will surprise alot of people. Hopefully you can try to adjust some of my perimeters to get me that few extra ponies to wheels lol. I know for a fact in St. Louis it will put down good numbers on there gas and air
 
Foxman

Foxman

Well-Known Member
wickedstangs said:
Mach, I don't understand how your going to say wrong gas or f up dyno. You do know that mustang dyno's give lower numbers, right? 350rwhp on a mustang dyno is equal to 390 to 400hp which is a stock 03-04 cobra. Giving Phil the benifit of the mods he has a 311rwhp is equal to 350 to 360 hp remember flywheel Which is a great achievement with the basic bolt on. Why do you think companies sale parts and bs on there product gains. Because they can vary with different vechicles. Phil go and dyno your car and then come and ask me how did I know:)
Click to expand...

ok i could not remember if the mustang dyno was high or low.. i just know i have seen high 350 whp on Stock cobras on a mustang dyno. on the same dyno phil put down 293hp. a 05 GTO put down 320.. thats rated at 400.. so I don't see your...

that is also why i said he needs to see the difference on the track
 
Foxman

Foxman

Well-Known Member
i have seen different horse power numbers on a car with a before and after gear swap... all a dyno does is simulate load... with like 3.55 to 4.10 I believe there will be a Increase on horse power reading because of the easier it is turning the wheels... i think it is increase but it might be decrease...
 
Foxman

Foxman

Well-Known Member
gears multiply power.... a car can start off with 300 hp after trans gear and rear end can easily have 1200 hp at the axles... we just don't rate it that way.. thats why wieght and load is a factor on automotive HP dynos...
 
Foxman

Foxman

Well-Known Member
agree worded that wrong... back to what you said... geasr do not make hp.. correct! but gears can improve the why the POWER is used... making it take less power to move the viechle faster. so Gears will change HP NUMBERS on a DYNO! like i said
 
GT400SC

GT400SC

PM for Decals
^^^You are correct.

And the same is true with aluminum driveshafts. very lightweight wheels and the like. The less "rotating mass" you have to spool up, the FASTER you spool up and that translates to increased HP readings on the dyno as well.

But that doesn't mean lightweight wheels give you horsepower. Ha!

Stickers do, though!
 
blackstallion06

blackstallion06

Everrett Wa. Soon to be St. Louis MO.
Donator
301/315 I talked to Diablo today about getting a tune. They said I should have more power my car needs some custom tuning. They also told me the T.B alone should have gave me 5 horses. The headers and the x-pipe I should have better numbers. They recomended me taking T.B. back off. JBA told me same thing... said its better with S/c or cams ect. I hope that Dibalo makes me a good tune to use with my other mods. They said I am loosing power I need a tune. Told me with mods I have I should be at least 320. Travis at JBA said the only thing I have left beside tuning is a driveshaft or they have a new part out that works like a MSD ignition for older cars. Its 400$ though..anyone have 1000$ to loan me so I can get this and my drive shaft lol
:) I need NOS!!!!
 
Foxman

Foxman

Well-Known Member
blackstallion06 said:
301/315 I talked to Diablo today about getting a tune. They said I should have more power my car needs some custom tuning. They also told me the T.B alone should have gave me 5 horses. The headers and the x-pipe I should have better numbers. They recomended me taking T.B. back off. JBA told me same thing... said its better with S/c or cams ect. I hope that Dibalo makes me a good tune to use with my other mods. They said I am loosing power I need a tune. Told me with mods I have I should be at least 320. Travis at JBA said the only thing I have left beside tuning is a driveshaft or they have a new part out that works like a MSD ignition for older cars. Its 400$ though..anyone have 1000$ to loan me so I can get this and my drive shaft lol
:) I need NOS!!!!
Click to expand...

damn with all those new mods you gained 3 hp and lost 5 trq?

I would dyno somewhere else...
 
blackstallion06

blackstallion06

Everrett Wa. Soon to be St. Louis MO.
Donator
Going to try to dyno at JBA. I took T.B off today and car seems to run better. I will see at track tonight
 
You must log in or register to reply here.
Top