• Hello there guest and welcome to our forum!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

Need advice

Gibs

Well-Known Member
Staff member
Global Moderator
Well coming down the mountain from Julian, It felt like my brakes were getting hot. Kinda spongy...... Well on the way home from work today I noticed that at highway speed when braking there is a slight vibration in the car. My questions are as follows:

1. Should I take to the dealer and complain that there is a vibration? Or see if they wear in and no longer vibrate?
2. Do you think they will take care of it? AKA Replace rotors
3. Should I tell them about the brakes getting spongy or play stupid?

My personal thought is:

1. YES YES YES/NO NO NO
2. YES with some problems from them as far as them saying I use them to hard.
3. NO Play stupid. " I do not know why they are acting up....."

Thanks,
Gib
 

wikedcobra312

Well-Known Member
i vote for you to go to the dealer and play dumb, if its covered they might replace it like they did with emilios car problem
hank
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
get some drilled and slotted rotors and blow the dealership up. if they make you buy the rotors(the stock ones if you choose to let them replace w/ stock let me know) i can get you a better price most likely just let me know the part(s) and #'s
 

wikedcobra312

Well-Known Member
+1 also we have the stangsuspension at our disposal as well, i working really hard to pick up more sponsorships as we speak
 

Gibs

Well-Known Member
Staff member
Global Moderator
^^ Are you insinuating that I rode the brakes? LOL dang ask for advice and I get blasted. I see how it is.

J/K

Gib
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
well i know some people at some dealerships that can get cheaper prices on stock parts for cars just let me know gib
 

Gibs

Well-Known Member
Staff member
Global Moderator
VP I was talkin to Henry.....Just messing with him.

I did ride the brakes a bit but I had the little ones in the car so I had to be a little more careful.

Gib.

VP I will let you know. I plan on taking it in soon. I got another little issue that needs fixed anyway.
 

wikedcobra312

Well-Known Member
okay, just let me now, also, i need a list of your guys mods, and also pictures of your cars. its for a sponsorhip that i am trying to get, i got the forms, and that is the criteria, i need them a the next meeting. this meeting will be a big one, i will also try to get grab bags for it from our sponsors....i know you were joking gibs lol. but suspension has never been our strong points in mustang lol.
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
hmm sponsorship huh sounds cool ive never thought of that... never htought i have enough done to the stang

Engine/Performance mods:
-3.73 FRPP gears-
-11" Chromaly Flywheel-
-FRPP 31 Spline axle-
-Centerforce Clutch & Kit w/ Pressure Plate-
-Brand New t-45 Tranny
-MSD 8.5 Super Conductor Spark Plug Wire
-MSD BLaster Coils Packs
-Steel Re-inforced Brake Lines-
-EBC Ceramic Brake Pads "red stuff"
-PowerMaster Battery-
-Steeda Tri-ax Short Shifter-
-BBK Off Road X-pipe
-Energy Suspensions Polyeurethane Engine mounts
-JLT TRU Cold Air Intake
-SLP "PowerFLO" muffelers
-SLP "Loud mouth"(i now put on "PowerFlo"loudmouth got me a fix it ticket)
-Drilled and Slotted Rotors
-Steeda Mil Eliminators
-Ford Racing Shorty Headers
-Stage 8 titanium exhaust bolts-
-SCE Pro Copper Exhaust Gaskets-
-CANTON Racing Products Windage Tray Kit(not installed yet)
Suspension Mods:
-Polyurethane front and rear spring islolaters-
-MM pinion snubber-
-Bilstein axle wrap shocks-
-Eibach front sway bar
-Eibach rear sway bar
-Prothane bushings for sway bay
-H&R Race Springs
-MM full length sub-frame connectors
-MM 3 bolt caster/chamber plates
-Bilstein HD shocks and struts
-Polyuerathane exhaust hangers
-Lakewood upper control arms
Appearance mods:
-Steeda Shift knob
-8" shorty antenna
-White Cobra Stem caps-
-3rd brake light "COBRA"
-FORD Skull insignia replacement
-GTS Smoked headlight covers
-Ford Racing fender covers
-Shaved bumper down 3 black with 2 clearcoats on front
-Xenon HD ultra white lights Combo
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
DSC05043.jpg

DSC05047.jpg

DSC05053.jpg

DSC05054.jpg

DSC05059.jpg

DSC05060.jpg

DSC05062.jpg

DSC05067.jpg

DSC05069.jpg

DSC05071.jpg

DSC05072.jpg

DSC05073.jpg

DSC04087.jpg
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
hopefully that helps you out i know mine isnt the newst nor fastest but has potential
 

Gibs

Well-Known Member
Staff member
Global Moderator
Here you go. I can not print them. And I have no actual pics of it so here:


INFO
2007 Mustang GTPremium/Manual/IUP/Dark Charcoal Dash Applique/FRPP Lowering Springs/FRPP GTA's/15% Tint


PICS
IMG_1936.jpg

IMG_1947.jpg

IMG_1951.jpg

IMG_0179-1.jpg

IMG_0257.jpg

And one just for you Henry.......

th_IMG_0977.jpg
 
W

wickedstangs

Guest
samantha how many miles do you have on the car?:) Your rotors may need turning if you had a vib, I mean vibriting in the wheels.lol
 

Gibs

Well-Known Member
Staff member
Global Moderator
SAMANTHA is the car......I am Gib.

12200 give or take.

I was thinking I might just see if it goes away.

Gib
 

wikedcobra312

Well-Known Member
thanks guys, i am going to move the post to another section, specifically made for what i need. vp you car is a beast, ws will help you unlock the potential of that car, and this goes to the rest of the members of ws.
 

VP_07SRT8

Tell the cops nothing!
Staff member
Board Member
im down to join once i get back but be advised im not a fan of stickers is that a big requirement?
 

Gibs

Well-Known Member
Staff member
Global Moderator
Yeah I do not want anymore stickers either. They are not to good on Black cars. They stand out horribly and make you look like rice.

Gib.
 
Top