Nice pics. Good luck with the tune and numbers.
-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
PROJECT WIKDLX
- Thread starter wickedstangs
- Start date
hoping for 330 thru an automatic and 2.73 gears
The gears just affect the steepness of the curve and not the overall horsepower. I'm going to guess 305.
orange395w
OG MEMBER
Intake is choking it. You should have put some little Gt40's on there if you were going to use that thing. Badass heads with a POS intake. What gears are in it?
orange395w
OG MEMBER
This is what you need. Don't pay attention to the rpm numbers. Run one of these and drive that thing like you stole it! The guy is in L.A. too. http://forums.corral.net/forums/win...low-box-r-intake-black-powder-coat-5-0-a.html
Just a little I paid to have my lower Ported by Thomas Moss
Labor for porting Explorer lower intake for AFR 185 heads - $160
Solvent tank, R&R oil baffle(s) bead blast, coat with 500°F clear ceramic engine enamel - $25
just stock looking..
Remember, WIKDLX is going to be my daily driver.
The intake I am using is not to bad..
orange395w
OG MEMBER
That article is from February of 2000 lol They didn't even make trickflow intakes back then haha. I'm sure it will make a lot of torque, but it's going to run out real quick up top.
speaking about trick, Pha is trying to get a hold of you trick
Yay, I am going to lose a bit of top end but, it will be fun down low. The Cam I got should work pretty good.
WIKDLX is Alive...
Dang E!! Just saw this thread... didnt know you had a fox too! It looks great! Hope mine turns out that good. Gonna be a loooong time before mine get there though...
It was either a new mercedes our fix up the fox i choose to fix up the fox..
Sent from my MB865 using Tapatalk 2
Sent from my MB865 using Tapatalk 2
That was a no brainer.....
Sent from my SAMSUNG-SGH-I847 using Tapatalk 2
Sent from my SAMSUNG-SGH-I847 using Tapatalk 2
V.I. Massive
SMIB
So ummmm..........where are pics of the finished product off of the rack. I am not local and the suspense is killing me. If it is secret send a pic. I'll pm the e-address.
not finished yet waiting for a couple of more parts...