xavier296
Well-Known Member
More to come today, but here is some of the first.
-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Some pics for Yose
- Thread starter xavier296
- Start date
0ne_sik_notch
Well-Known Member
oooooo giggle juice hahahahahahehehehelololo
Nice!!!!!!. Lovin it already!!!!!
What are those two switches going to be used for?
0ne_sik_notch
Well-Known Member
on/off on/off
lol Well I kinda figured that lol. I was meaning arm/disarm, purge, or heater.........
xavier296
Well-Known Member
orange will be bottle heater, red will be arm. Both light up when turned on. Haven't gotten a button for the purge yet. Gotta hit up the store again. I am mounting the solenoids right now.
0ne_sik_notch
Well-Known Member
one maybe to activate the sylinoids and one to purge you may want to add a bottle switch to open close later so you dont have to stop and get out lol
xavier296
Well-Known Member
I don't have a remote opener yet to install, james may decide he wants that too.
James, how do you take the subs out again?
James, how do you take the subs out again?
Nice work! Good job aaron, looks clean.
atlblue98gt
Greer, SC
Look very professional. Good work.
You have to take the subs out of the box and the the screws are inside on the top. Sorry they are a pain in the ass but that is how I did it.
sdsubzero4
Spring Valley, CA
Nice built Xavier.
xavier296
Well-Known Member
More pics, but they are crappy. Underhood is complete with the exception of putting in the right jets. Purge and everything are installed. If you look closely next to the air filter you can see the purge solenoid, but you can't see the regular solenoids at all!! I can tell you that they are in the first pic, but good luck findin em.
xavier296
Well-Known Member
Lets see if this works:
[ame=http://s108.photobucket.com/albums/n4/zks1618/?action=view¤t=MOV01119.flv]
[/ame]
[ame=http://s108.photobucket.com/albums/n4/zks1618/?action=view¤t=MOV01119.flv]
Cant wait to get home to check this out.
sdsubzero4
Spring Valley, CA
Dang. That is gonna make that car not only perform like a beast, but will look like a beast with that purge. Great work Aaron.
Loved the Vid. Where are the lines for the purge?
That was awesome. I love the purge coming out of the vents.
Here is the info from SVTP.
its not that hard.......if you want a parts list PM me, or just go off the below.
Alot of its in the jetting, I always go by NX's chart which is rwhp not crank.
This is what I have always used
.035 = 50 shot
.042 = 75 shot
.047 = 85 shot
.052 = 100 shot
.057 = 125 shot
.062 = 150 shot
I keep it simple, good N20 solenoid, I run post maf dry shot, closer to the TB the better.
its not that hard.......if you want a parts list PM me, or just go off the below.
Alot of its in the jetting, I always go by NX's chart which is rwhp not crank.
This is what I have always used
.035 = 50 shot
.042 = 75 shot
.047 = 85 shot
.052 = 100 shot
.057 = 125 shot
.062 = 150 shot
I keep it simple, good N20 solenoid, I run post maf dry shot, closer to the TB the better.