Renegade
Well-Known Member
hey guys, who on here disconnects their front swaybar when they go to the track? IM running Eibach prokits on my car and was wandering if there was any problem with running the car with out a swaybar at the strip
-
Hello there guest and welcome to our forum!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Sway bar question
- Thread starter Renegade
- Start date
The function of a sway bar is usually to prevent weight transfer from one side to the other in cornering situations. By preventing weight transfer, the inside wheel in a corner maintains more of its static weight.
When Drag Racing you want to remove it so you get better weight transfer.
When Drag Racing you want to remove it so you get better weight transfer.
That is why emilio has pics of his front end up in the air and I have 7.5's
Yose 7.5 to 7.7 is not that far off and I had passengers all 3 runs... Now you and I both know what happened to you on the freeway and I even had 4 passengers.......... Twice
STFU
02gt
Well-Known Member
I run with no sway bar all the time, it makes a big differnce at the track to get the nose up for me. As far as running on the street you get alot of body roll but i control that with setting the shocks and struts stiff.
beejay31000
BULLWINKLE
swaybar....who needs a frickin swaybar...pussies
02gt
Well-Known Member
F'N a cotton f'n a
Foxman
Well-Known Member
lol all you really have to do is unbolt the end links once you get to the track and put them back on when you leave... you dont have to take the hole thing off every time... I like sway bars...
beejay31000
BULLWINKLE
Renegade
Well-Known Member
i know, im gunna tie it up with zip ties so its out of the way, i was just wandering if anyone had ever had any problem, didnt wanna launch at the track and have a spring pop out of place, thanks for the info guys
For a spring to pop out you have to have ripped a strut bolt off. That isn't gonna happen.
Renegade
Well-Known Member
ok sweet, thanks guys, and also orange what hight and width of a slick do you think i should run? im going to run them on 15x10 rims
28 x 10.5
Renegade
Well-Known Member
ok cool, thanks emilio, and im gunna be running a 3.90 gear, still the tire i should go with?
Have you been to the track? If so with what tires? What rpm did you go through the traps at?
You likely don't need a 28" tire. I would go with a 26x11.5 E.T.street
You will need plenty of tq to get those 28's moving and those mod motors aren't known for making big tq#'s.
You likely don't need a 28" tire. I would go with a 26x11.5 E.T.street
You will need plenty of tq to get those 28's moving and those mod motors aren't known for making big tq#'s.
Hey now. I resemble that remark.
Yose 7.5 to 7.7 is not that far off and I had passengers all 3 runs... Now you and I both know what happened to you on the freeway and I even had 4 passengers.......... Twice
STFU
Every time we have gone against each other it has had the same results.....you seeing the back of one sexy BLACK COBRA VERT!!!!! Dont try to lie!!!!!!!
Cobra's are the exception when speaking of tq because of the roots blower. He has a mach 1 as far as I know without a power adder. Also he hasn't stated if we are talking 1/8 or 1/4 mile.
I was always told Marines had short memory.. I didnt know it was that bad....:rofl: